How to replace the door emblem and nameplate on 2007 Chevrolet Silverado 3500 Classic?

The necessary replacement tools for door emblem and nameplate work include the following: Heat Gun (J 25070) combined with 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501). The toolkit consists of Heat Gun (J 25070) and 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501). The first step is to wrap tape across the door emblem space for both protection and precise positioning. Position the Heat Gun (J 25070) 152 mm away from the emblem/nameplate during a 30-second circular motion period. Start by removing the emblem/nameplate with a round-blade plastic tool then clean up any remaining adhesive from both the door panel and the back of the emblem/nameplate using 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501). Use varnish makers and painters (VMP) naptha to clean the door surface. Place tape once more in the unmarked emblem/nameplate area. Use the Heat Gun (J 25070) to warm the door surface to at least 21°C (70°F) without touching either the adhesive backing of the emblem/nameplate. Reposition the front end of the emblem/nameplate onto the door panel by removing its backing while still pulling away the backing. Hand rolling the emblem and nameplate will secure proper adhesion after which you should inspect the bonding before removing tape from around the door emblem.

OEM 2007 Chevrolet Silverado 3500 Classic Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2007 Chevrolet Silverado 3500 Classic Nameplate, Rear Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.9 x 16.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15126056
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Nameplate, Outer Part Number: 15036132
$48.74 MSRP: $69.75
You Save: $21.01 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate, Side Panel Wheel Opening; Body Side Lower Front; Fuel Door & Body Side; Pickup Box Side Lower
- Position: Outer
- Replaces: 15646974, 15705586
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.5 x 2.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15036132
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Nameplate, Rear Part Number: 84682637
$51.41 MSRP: $76.52
You Save: $25.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate Assembly, Emblem, Front and Rear Side Door, Hood Panel Ornamentation, Front Fender Name
- Position: Rear
- Replaces: 15767139, 22884136
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.0 x 3.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 84682637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.6 L DIESEL
View related parts
2007 Chevrolet Silverado 3500 Classic Nameplate Part Number: 84674406
$42.15 MSRP: $60.31
You Save: $18.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-End Gate Divider Name *Chrome; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Replaces: 22884137, 15195869, 15029627
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84674406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Nameplate, Front Part Number: 15268796
$47.16 MSRP: $70.20
You Save: $23.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 11.7 x 1.9 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15268796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Emblem, Front Part Number: 12335700
$80.11 MSRP: $119.24
You Save: $39.13 (33%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.9 x 2.8 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12335700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Nameplate, Outer Part Number: 15126053
$57.99 MSRP: $86.32
You Save: $28.33 (33%)
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Replaces: 15182305, 15707436
- Item Weight: 0.40 Pounds
- Item Dimensions: 10.6 x 2.0 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15126053
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

2007 Chevrolet Silverado 3500 Classic Emblem

With a comprehensive array of OEM 2007 Chevrolet Silverado 3500 Classic Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Silverado 3500 Classic Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Silverado 3500 Classic Emblem Parts and Q&A

Q: How to replace the door emblem and nameplate on 2007 Chevrolet Silverado 3500 Classic?
A: The necessary replacement tools for door emblem and nameplate work include the following: Heat Gun (J 25070) combined with 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501). The toolkit consists of Heat Gun (J 25070) and 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501). The first step is to wrap tape across the door emblem space for both protection and precise positioning. Position the Heat Gun (J 25070) 152 mm away from the emblem/nameplate during a 30-second circular motion period. Start by removing the emblem/nameplate with a round-blade plastic tool then clean up any remaining adhesive from both the door panel and the back of the emblem/nameplate using 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501). Use varnish makers and painters (VMP) naptha to clean the door surface. Place tape once more in the unmarked emblem/nameplate area. Use the Heat Gun (J 25070) to warm the door surface to at least 21°C (70°F) without touching either the adhesive backing of the emblem/nameplate. Reposition the front end of the emblem/nameplate onto the door panel by removing its backing while still pulling away the backing. Hand rolling the emblem and nameplate will secure proper adhesion after which you should inspect the bonding before removing tape from around the door emblem.