Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 15817924, 25795316
Item Weight: 1.10 Pounds
Item Dimensions: 9.0 x 5.5 x 4.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 20815645
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
2007 Chevrolet Impala Door Lock Actuator
With a comprehensive array of OEM 2007 Chevrolet Impala Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Impala Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Chevrolet Impala Door Lock Actuator Parts and Q&A
Q: How to replace the front side door lock actuator on 2007 Chevrolet Impala?
A: The front side Door Lock Actuator replacement process starts with front Door Lock removal after which you must undo the screws which keep the front Door Lock attached to the front Door Lock Actuator. The front door actuator needs detaching from the front Door Lock. The front door actuator installation requires you to match it with the front Door Lock while following the fastener notice instructions. Secure the screws which attach the front Door Lock to the front door actuator until they register 2 n.m torque or 18 lb in measurement. The installation of the front Door Lock completes the procedure.