How to replace the Engine Coolant Temperature Sensor on 2007 Chevrolet Impala?

To change the Engine Coolant Temperature Sensor, drain the cooling systems first. Then remove, if needed, the intake manifold cover as well as the exhaust crossover. You need to disconnect the engine coolant temperature (ECT) sensor electrical connector and dispose of the ECT sensor. For installation, always make sure that replacement components are the part number for the application and if it is necessary, application of thread locking compound, lubricants, corrosion inhibiting, or sealants as it is indicated. Seal the threads of ECT sensor with sealer GM P/N 13246004 (Canadian P/N 10953480) or equivalent and then install the ECT sensor and tighten it to 20 N.m (15 lb ft). Connect the ECT electric connection and added intake manifold cover back or then install the exhaust crossover. Finally, fill the cooling system.

OEM 2007 Chevrolet Impala Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2007 Chevrolet Impala Coolant Temperature Sensor, Black Part Number: 12608814
$30.66 MSRP: $57.58
You Save: $26.92 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Coolant Temperature *Ite Or Black; Engine Coolant Temperature Sensor; Temperature Sensor; Temperature Sending Unit; Coolant Temperature Sensor; Engine Oil Pressure/Temperature Sensor; Computer Control Sensors
- Replaces: 15369305, 25037062, 12191170, 15326388
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 1.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, SS | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2007 Chevrolet Impala Coolant Temperature Sensor

With a comprehensive array of OEM 2007 Chevrolet Impala Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Impala Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Impala Coolant Temperature Sensor Parts and Q&A

Q: How to replace the Engine Coolant Temperature Sensor on 2007 Chevrolet Impala?
A: To change the Engine Coolant Temperature Sensor, drain the cooling systems first. Then remove, if needed, the intake manifold cover as well as the exhaust crossover. You need to disconnect the engine coolant temperature (ECT) sensor electrical connector and dispose of the ECT sensor. For installation, always make sure that replacement components are the part number for the application and if it is necessary, application of thread locking compound, lubricants, corrosion inhibiting, or sealants as it is indicated. Seal the threads of ECT sensor with sealer GM P/N 13246004 (Canadian P/N 10953480) or equivalent and then install the ECT sensor and tighten it to 20 N.m (15 lb ft). Connect the ECT electric connection and added intake manifold cover back or then install the exhaust crossover. Finally, fill the cooling system.