How to replace the harmonic balancer on 2007 Chevrolet Equinox?

In removing the crankshaft balancer, the Serpentine Belt Tensioner Unloader is used to loosen the tension of the drive belt and then the belt is removed. Lift the car, take off the right front wheel, the crankshaft balancer screw. Install the Crankshaft Balancer Remover and remove balancer, use sealer and then reinstall. The alignment of the belts should be done correctly and then closed.

OEM 2007 Chevrolet Equinox Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

View related parts
2007 Chevrolet Equinox Crankshaft Pulley Part Number: 12621646
$82.26 MSRP: $141.22
You Save: $58.96 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12581298, 12588034
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.2 x 8.3 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12621646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2007 Chevrolet Equinox Harmonic Balancer

With a comprehensive array of OEM 2007 Chevrolet Equinox Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Equinox Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Equinox Harmonic Balancer Parts and Q&A

Q: How to replace the harmonic balancer on 2007 Chevrolet Equinox?
A: In removing the crankshaft balancer, the Serpentine Belt Tensioner Unloader is used to loosen the tension of the drive belt and then the belt is removed. Lift the car, take off the right front wheel, the crankshaft balancer screw. Install the Crankshaft Balancer Remover and remove balancer, use sealer and then reinstall. The alignment of the belts should be done correctly and then closed.