How to replace the digital radio antenna cable in a coupe on 2007 Chevrolet Corvette?

The first step to replacing the digital radio Antenna Cable in a coupe is to remove the right instrument panel closeout panel and the right front carpet retainer. You can find the cable by looking for the specially marked connector at the door pillar closest to the body. Disconnect the plug and cut the cable so that it has the exact length necessary. Take out the left door release lever, the left carpet retainer and the left instrument panel closeout panel. Reach over to the left side of the instrument panel and gently pull the plastic cover away from the pillar to door pass-through. Remove the connector from the end of the old digital Antenna Cable and cut it off at the body side of the harness, far from any components. Peel back the carpet in the rear area of the vehicle to reach the digital radio receiver. Once located, disconnect the Antenna Cable connectors and cut the cables on the side of the harness facing the body. Install the new Antenna Cable by guiding a length of mechanic's wire toward the rear part of the instrument panel or Center Console, connecting it to the right half of the new cable with tape, then pulling it around the instrument panel to its right side using the path of the old cable as a guide. Push the new connector into the seal in the right side pillar to door pass-through opening from the right side of the instrument panel, connect it and properly place the seal back in place. Position tie straps beside the right side of the instrument panel and under the new Antenna Cable, securing them into place. Do the same for the left side by feeding the new connector behind the seal, attaching it to the mechanic's wire and holding everything in place with tie straps. Follow the same path of the old cable to the digital receiver and connect the new one with the help of tie straps when needed. The last step is to put back the right front carpet retainer, right and left instrument panel closeout panels, left lock pillar trim, left front carpet retainer, left side door mechanical release lever and the rear compartment carpet.

OEM 2007 Chevrolet Corvette Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Antenna Cables found

View related parts
2007 Chevrolet Corvette Element, Passenger Side Part Number: 10321027
$1.69 MSRP: $3.06
You Save: $1.37 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.4 x 4.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10321027
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Cable Part Number: 25783497
$79.21 MSRP: $125.76
You Save: $46.55 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Mobile Telephone Radio
- Replaces: 15866787
- Item Weight: 1.50 Pounds
- Item Dimensions: 17.2 x 17.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25783497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Cable, Driver Side Part Number: 25896193
$20.60 MSRP: $38.67
You Save: $18.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Position: Driver Side
- Replaces: 15780811
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.8 x 10.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25896193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Cable Part Number: 15275928
$106.87 MSRP: $200.70
You Save: $93.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Mobile Telephone Radio
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.3 x 12.5 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15275928
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Cable, Passenger Side Part Number: 25896192
$55.62 MSRP: $104.47
You Save: $48.85 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Position: Passenger Side
- Replaces: 15780810
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 4.0 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25896192
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Cable, Driver Side Part Number: 25896191
$51.39 MSRP: $93.01
You Save: $41.62 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Position: Driver Side
- Replaces: 15780809
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.0 x 10.4 inches
- Condition: New
- SKU: 25896191
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Cable, Passenger Side Part Number: 25896194
$61.17 MSRP: $114.89
You Save: $53.72 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Position: Passenger Side
- Replaces: 15780812
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 4.2 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25896194
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Cable Part Number: 10352909
$16.85 MSRP: $53.97
You Save: $37.12 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.0 x 13.3 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10352909
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Element, Driver Side Part Number: 10321026
$11.92 MSRP: $17.67
You Save: $5.75 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.2 x 4.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10321026
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Antenna Cable Part Number: 20996975
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Connector; Cable, Radio Antenna
- Replaces: 10324022
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.2 x 4.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20996975
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Cable Part Number: 10352908
Product Specifications
- Other Name: Cable, Radio Antenna
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.0 x 13.7 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10352908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2007 Chevrolet Corvette Antenna Cable

With a comprehensive array of OEM 2007 Chevrolet Corvette Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Corvette Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Corvette Antenna Cable Parts and Q&A

Q: How to replace the digital radio antenna cable in a coupe on 2007 Chevrolet Corvette?
A: The first step to replacing the digital radio Antenna Cable in a coupe is to remove the right instrument panel closeout panel and the right front carpet retainer. You can find the cable by looking for the specially marked connector at the door pillar closest to the body. Disconnect the plug and cut the cable so that it has the exact length necessary. Take out the left door release lever, the left carpet retainer and the left instrument panel closeout panel. Reach over to the left side of the instrument panel and gently pull the plastic cover away from the pillar to door pass-through. Remove the connector from the end of the old digital Antenna Cable and cut it off at the body side of the harness, far from any components. Peel back the carpet in the rear area of the vehicle to reach the digital radio receiver. Once located, disconnect the Antenna Cable connectors and cut the cables on the side of the harness facing the body. Install the new Antenna Cable by guiding a length of mechanic's wire toward the rear part of the instrument panel or Center Console, connecting it to the right half of the new cable with tape, then pulling it around the instrument panel to its right side using the path of the old cable as a guide. Push the new connector into the seal in the right side pillar to door pass-through opening from the right side of the instrument panel, connect it and properly place the seal back in place. Position tie straps beside the right side of the instrument panel and under the new Antenna Cable, securing them into place. Do the same for the left side by feeding the new connector behind the seal, attaching it to the mechanic's wire and holding everything in place with tie straps. Follow the same path of the old cable to the digital receiver and connect the new one with the help of tie straps when needed. The last step is to put back the right front carpet retainer, right and left instrument panel closeout panels, left lock pillar trim, left front carpet retainer, left side door mechanical release lever and the rear compartment carpet.