How to replace the Rack and Pinion Boot on 2007 Cadillac XLR?

To change the steering gear boot, you will require the following tools. Loosen the outer tie rod and hex jam nut and remove the rack and pinion boot. Fit a new boot clamp, grease and make sure that the boot is well positioned. Install the tie rod end clamp again and secure the boot clamp.

OEM 2007 Cadillac XLR Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2007 Cadillac XLR Tie Rod Boot Part Number: 88964553
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88964553
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac XLR Rack and Pinion Boot

With a comprehensive array of OEM 2007 Cadillac XLR Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac XLR Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac XLR Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on 2007 Cadillac XLR?
A: To change the steering gear boot, you will require the following tools. Loosen the outer tie rod and hex jam nut and remove the rack and pinion boot. Fit a new boot clamp, grease and make sure that the boot is well positioned. Install the tie rod end clamp again and secure the boot clamp.