OEM 2007 Cadillac STS Alternator Bracket

2007 Cadillac STS Alternator Bracket Parts and Q&A

• Q: How to replace the Alternator Bracket (LY7) on 2007 Cadillac STS?

  A: Turn off the ignition then remove the generator to access the generator bracket (LY7). Begin by removing the generator bracket bolts first then the belt tensioner and coolant inlet pipe lower bolt from the generator bracket to take out the generator bracket. To begin installation start by adding the generator bracket then carefully follow the fastener notice protocol. Fasten generator bracket bolts following the precise tightening schedule: first tighten bolts (1, 2) to 50 n.m (37 lb ft) then bolt to 23 n.m (17 lb ft). The installation includes tightening bolt (1, 2) to 50 n.m (37 lb ft) and bolt to 23 n.m (17 lb ft). In the final stage install the belt tensioner then follow with the coolant inlet pipe lower bolt from the generator bracket before completing with the generator.