How to properly service and repair the EGR Tube on 2007 Cadillac DTS?

You must start the egr pipe replacement by removing the egr pipe bolt situated at the water pump housing. Next step is to lift the vehicle before providing support. Before continuing with the next steps you must remove the egr valve pipe by first loosening its nut at the Exhaust Manifold. Protect the egr valve pipe by inserting it through the Exhaust Manifold before tightening its pipe nut at 60 n.m (44 lb ft). Install the egr valve pipe bolt at the water pump housing before lowering the vehicle and tightening it to 28 n.m (21 lb ft). The pipe connecting the egr valve inlet should be changed when it becomes disconnected from the water pump housing since it features a crush seal design.

OEM 2007 Cadillac DTS EGR Tube

EGR Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 EGR Tube found

View related parts
2007 Cadillac DTS EGR Pipe Part Number: 12567659
Product Specifications
- Other Name: Pipe Assembly-EGR Valve; EGR Tube; Outlet Pipe; Tube; Pipe, Emission System
- Replaces: 12558019
- Item Weight: 1.30 Pounds
- Item Dimensions: 9.4 x 6.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567659
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2007 Cadillac DTS EGR Tube

With a comprehensive array of OEM 2007 Cadillac DTS EGR Tube, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac DTS EGR Tube are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac DTS EGR Tube Parts and Q&A

Q: How to properly service and repair the EGR Tube on 2007 Cadillac DTS?
A: You must start the egr pipe replacement by removing the egr pipe bolt situated at the water pump housing. Next step is to lift the vehicle before providing support. Before continuing with the next steps you must remove the egr valve pipe by first loosening its nut at the Exhaust Manifold. Protect the egr valve pipe by inserting it through the Exhaust Manifold before tightening its pipe nut at 60 n.m (44 lb ft). Install the egr valve pipe bolt at the water pump housing before lowering the vehicle and tightening it to 28 n.m (21 lb ft). The pipe connecting the egr valve inlet should be changed when it becomes disconnected from the water pump housing since it features a crush seal design.