How to replace the Power Steering Hose on 2007 Buick Rendezvous?

The replacement of power steering cooler pipe/hose begins by elevating and supporting the vehicle before uninstalling the right front tire assembly along with the power steering gear heat shield. Users should first disconnect the wiring harness from the power steering cooler pipe/hose bracket stud before compressing the clamp to free up the power steering pump inlet pipe/hose from the power steering cooler pipe/hose. The power steering gear requires the power steering cooler pipe/hose and its O-ring seal to be detached before disposal. First remove the retaining bolt and the retaining nut on the power steering cooler pipe from the RH cradle side before taking out the cooler pipe from the vehicle through the front of the cradle. Insert the new power steering cooler pipe/hose into place before installing the retaining nut and bolt to the right-hand cradle side while tightening them to 10 N.m (89 lb in). Thread in the retaining bolts at the cradle front side before tightening them to 10 N.m (89 lb in). Install a new O-ring before connecting the power steering gear with the cooler pipe/hose while securing the nut at 27 N.m (20 lb ft). Snap the clamp while joining the power steering pump inlet pipe/hose with the cooler pipe/hose followed by reinstating the wiring harness to the bracket stud. Make the final installation by placing the power steering gear heat shield and right front wheel components next to each other then reduce the vehicle and complete power steering system fluid filling and bleeding steps.

OEM 2007 Buick Rendezvous Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Power Steering Hoses found

View related parts
2007 Buick Rendezvous Power Steering Pressure Hose Part Number: 15777622
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure
- Replaces: 10311306
- Item Weight: 1.80 Pounds
- Item Dimensions: 22.9 x 20.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Buick Rendezvous Power Steering Return Hose Part Number: 10313825
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Reservoir Hose
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10313825
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Power Steering Return Hose Part Number: 10398396
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 10313826
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.0 x 5.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10398396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Cooling Pipe Part Number: 15777623
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Power Steering Cooler; Power Steering Oil Cooler; Hose, Steering Fluid Cooler
- Replaces: 26078270
- Item Weight: 1.40 Pounds
- Item Dimensions: 36.2 x 15.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777623
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Pressure Hose Part Number: 15777621
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Hose, Steering Gear Oil Pressure
- Replaces: 26080030, 26079965
- Item Weight: 1.80 Pounds
- Item Dimensions: 19.6 x 11.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777621
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Buick Rendezvous Power Steering Return Hose Part Number: 15777620
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose
- Replaces: 26073960
- Item Weight: 0.70 Pounds
- Item Dimensions: 23.0 x 6.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Buick Rendezvous Pipe Kit, Passenger Side Part Number: 26045506
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Pressure Line; Line Kit; Line
- Position: Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 20.3 x 6.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26045506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Pipe Kit, Driver Side Part Number: 26045505
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Pressure Line; Line Kit; Line
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.5 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26045505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2007 Buick Rendezvous Power Steering Hose

With a comprehensive array of OEM 2007 Buick Rendezvous Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Power Steering Hose Parts and Q&A

Q: How to replace the Power Steering Hose on 2007 Buick Rendezvous?
A: The replacement of power steering cooler pipe/hose begins by elevating and supporting the vehicle before uninstalling the right front tire assembly along with the power steering gear heat shield. Users should first disconnect the wiring harness from the power steering cooler pipe/hose bracket stud before compressing the clamp to free up the power steering pump inlet pipe/hose from the power steering cooler pipe/hose. The power steering gear requires the power steering cooler pipe/hose and its O-ring seal to be detached before disposal. First remove the retaining bolt and the retaining nut on the power steering cooler pipe from the RH cradle side before taking out the cooler pipe from the vehicle through the front of the cradle. Insert the new power steering cooler pipe/hose into place before installing the retaining nut and bolt to the right-hand cradle side while tightening them to 10 N.m (89 lb in). Thread in the retaining bolts at the cradle front side before tightening them to 10 N.m (89 lb in). Install a new O-ring before connecting the power steering gear with the cooler pipe/hose while securing the nut at 27 N.m (20 lb ft). Snap the clamp while joining the power steering pump inlet pipe/hose with the cooler pipe/hose followed by reinstating the wiring harness to the bracket stud. Make the final installation by placing the power steering gear heat shield and right front wheel components next to each other then reduce the vehicle and complete power steering system fluid filling and bleeding steps.