How to replace the Dipstick Tube and oil level indicator on 2007 Buick Rendezvous?

To replace the oil level indicator and tube, disconnect the number 6 spark plug wire, remove the oil level indicator and tube bracket bolt, then take out the tube. Apply sealant around the tube, install it into the engine block, tighten the bracket bolt, and reconnect the spark plug wire.

OEM 2007 Buick Rendezvous Dipstick Tube

Oil Dipstick Tube

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dipstick Tube found

View related parts
2007 Buick Rendezvous Dipstick Tube Part Number: 24507976
$13.99 MSRP: $22.21
You Save: $8.22 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly-Oil Level Indicator; Oil Dipstick Tube; Oil Tube; Tube Assembly; Guide Tube; Tube; Tube, Engine Oil Level
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.6 x 3.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24507976
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS

2007 Buick Rendezvous Dipstick Tube

With a comprehensive array of OEM 2007 Buick Rendezvous Dipstick Tube, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Dipstick Tube are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Dipstick Tube Parts and Q&A

Q: How to replace the Dipstick Tube and oil level indicator on 2007 Buick Rendezvous?
A: To replace the oil level indicator and tube, disconnect the number 6 spark plug wire, remove the oil level indicator and tube bracket bolt, then take out the tube. Apply sealant around the tube, install it into the engine block, tighten the bracket bolt, and reconnect the spark plug wire.