How to replace the coil spring insulators on 2007 Buick Lucerne?

The Coil Spring Insulator replacement process starts with lifting the motor vehicle off the ground. Raise the vehicle first then unscrew the wheel and tire before using a jack stand to support the lower Control Arm. First disconnect the shock absorber's automatic level control air tube before removing the lower shock absorber retaining bolts. Start by removing the adjustment link retaining nut then employ the universal steering linkage puller (J 24319-B) to split the adjustment link from the lower Control Arm. Lower the Control Arm toward the support while prying the lower Coil Spring Insulator free to finally extract the coil spring and insulator. You should pull down to detach the upper Coil Spring Insulator. Dismount the upper Coil Spring Insulator retainer into the vehicle body before mounting the coil spring followed by the lower insulator and verifying the insulator sits in the lower Control Arm. After lifting the lower Control Arm into position you should attach the two shock bolts to the Control Arm. Next install and tighten the lower shock absorber retaining bolts to 25 n.m (18 lb ft). Connect the adjustment link to the lower Control Arm before tightening the retaining nut to 30 n.m (22 lb ft) and an additional 180 degree rotation. To complete the installation replace the automatic level control air tube to the shock absorber, secure the tire and wheel, then position the vehicle on the ground.

OEM 2007 Buick Lucerne Coil Spring Insulator

Coil Spring Noise Insulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coil Spring Insulators found

View related parts
2007 Buick Lucerne Spring Seat, Rear Passenger Side Part Number: 25710008
$114.08 MSRP: $250.56
You Save: $136.48 (55%)
ADD TO CART
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Passenger Side
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.9 x 7.4 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710008
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Spring Seat, Rear Driver Side Part Number: 25710009
$63.91 MSRP: $114.13
You Save: $50.22 (44%)
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Driver Side
- Item Weight: 2.60 Pounds
- Item Dimensions: 13.1 x 8.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Spring Insulator, Rear Part Number: 25703339
Product Specifications
- Other Name: Bumper, Rear Axle; Coil Spring Insulator; Spring Bumper; Upper Insulator; Spring Upper Insulator; Bumper; Bumper, Rear Spring
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.4 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25703339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Spring Insulator, Front Upper Part Number: 15220801
Product Specifications
- Other Name: Insulator-Front Spring Upper; Coil Spring Insulator; Spring Upper Insulator; Insulator, Front Spring
- Position: Front Upper
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.0 x 7.9 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15220801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Spring Insulator, Front Part Number: 15220802
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Spring Lower Insulator
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 6.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15220802
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Buick Lucerne Spring Insulator, Rear Lower Part Number: 25627582
Product Specifications
- Other Name: Insulator, Rear Spring Lower; Coil Spring Insulator; Lower Insulator; Spring Lower Insulator; Insulator; Insulator, Rear Spring
- Position: Rear Lower
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.8 x 7.2 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25627582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2007 Buick Lucerne Coil Spring Insulator

With a comprehensive array of OEM 2007 Buick Lucerne Coil Spring Insulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Lucerne Coil Spring Insulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Lucerne Coil Spring Insulator Parts and Q&A

Q: How to replace the coil spring insulators on 2007 Buick Lucerne?
A: The Coil Spring Insulator replacement process starts with lifting the motor vehicle off the ground. Raise the vehicle first then unscrew the wheel and tire before using a jack stand to support the lower Control Arm. First disconnect the shock absorber's automatic level control air tube before removing the lower shock absorber retaining bolts. Start by removing the adjustment link retaining nut then employ the universal steering linkage puller (J 24319-B) to split the adjustment link from the lower Control Arm. Lower the Control Arm toward the support while prying the lower Coil Spring Insulator free to finally extract the coil spring and insulator. You should pull down to detach the upper Coil Spring Insulator. Dismount the upper Coil Spring Insulator retainer into the vehicle body before mounting the coil spring followed by the lower insulator and verifying the insulator sits in the lower Control Arm. After lifting the lower Control Arm into position you should attach the two shock bolts to the Control Arm. Next install and tighten the lower shock absorber retaining bolts to 25 n.m (18 lb ft). Connect the adjustment link to the lower Control Arm before tightening the retaining nut to 30 n.m (22 lb ft) and an additional 180 degree rotation. To complete the installation replace the automatic level control air tube to the shock absorber, secure the tire and wheel, then position the vehicle on the ground.