How to replace the steering wheel on 2006 Chevrolet Uplander?

First, disable the restraint system in order to replace the steering wheel. Next, take out an inflator module and separate the steering wheel control electric connector. Then, you should pull off the steering wheel nut. Mount the Steering Wheel Puller Legs (J 42578) and the Steering Wheel Puller (J 1859-A) onto the steering wheel and then pull the steering wheel away. After removal, puller legs and shall be pulled off from the steering wheel. If equipped, disconnect the controls and the control harness from the steering wheel. For installation, if so equipped, install the control and the control harness to the steering wheel, then pass the wiring through the steering wheel. Mount the steering wheel and attach its steering wheel control Electric connector. Incorporate the steering wheel nut and tighten it to 41 Nm (30 ft. lbs.). Finally, install the inflator module and activate the system of restraints.

OEM 2006 Chevrolet Uplander Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Wheels found

View related parts
2006 Chevrolet Uplander Steering Wheel Part Number: 25894309
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 5.60 Pounds
- Item Dimensions: 16.4 x 16.3 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25894309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Uplander Steering Wheel Part Number: 25894308
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 5.20 Pounds
- Item Dimensions: 16.1 x 16.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25894308
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Uplander Steering Wheel Part Number: 25894314
Product Specifications
- Other Name: Wheel, Steering
- Replaces: 15774498
- Item Weight: 7.80 Pounds
- Item Dimensions: 18.9 x 18.9 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25894314
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Chevrolet Uplander Steering Wheel

With a comprehensive array of OEM 2006 Chevrolet Uplander Steering Wheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Uplander Steering Wheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Uplander Steering Wheel Parts and Q&A

Q: How to replace the steering wheel on 2006 Chevrolet Uplander?
A: First, disable the restraint system in order to replace the steering wheel. Next, take out an inflator module and separate the steering wheel control electric connector. Then, you should pull off the steering wheel nut. Mount the Steering Wheel Puller Legs (J 42578) and the Steering Wheel Puller (J 1859-A) onto the steering wheel and then pull the steering wheel away. After removal, puller legs and shall be pulled off from the steering wheel. If equipped, disconnect the controls and the control harness from the steering wheel. For installation, if so equipped, install the control and the control harness to the steering wheel, then pass the wiring through the steering wheel. Mount the steering wheel and attach its steering wheel control Electric connector. Incorporate the steering wheel nut and tighten it to 41 Nm (30 ft. lbs.). Finally, install the inflator module and activate the system of restraints.