OEM 2006 Chevrolet SSR Differential Cover

2006 Chevrolet SSR Differential Cover Parts and Q&A

• Q: How to replace the rear differential cover and gasket on 2006 Chevrolet SSR?

  A: The replacement process of the rear axle housing cover and gasket begins with lifting the vehicle and draining the axle lubricant. Work slowly while removing the rear axle housing cover because contact with the gasket must be avoided to prevent any damage that could harm the sealing ability. Transfer the lubricating fluid from the axle through an appropriate container. The inspection of your rear axle cover gasket must determine if nicks, cuts or any damage exists that would prevent proper sealing so you should obtain a new gasket if needed. Preparation of the gasket requires cleaning with suitable cleaner while gasket surfaces of both rear axle housing cover and housing should also get cleaned before installation. Position first the rear axle housing cover gasket and then fit the rear axle housing cover . The rear axle housing cover bolts should be installed using a crosswise pattern while tightening them to 30 Nm (20 ft. lbs.). As the final step use the correct axle lubricant to fill the rear axle before lowering the vehicle.