How to replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 on 2006 Chevrolet Silverado 3500?

To replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2, initially raise and aid the motor vehicle. If equipped, disconnect the fuel composition sensor electrical connector as well as the connector position assurance (CPA) retainer. In case a fuel composition sensor is available, there is need of removing the HO2S from the fuel line clip's electrical connector. For engines with 4.8 liters and 5.3 liters of engine, remove the HO2S electric connector, while for engines that are 6.0L, do the same. Remove the HO2S. During installation, apply anti-seize compound GM P/N 12377953 on the old sensor's threads if it is being reused because new sensors arrive pre-coated. Carry out the installation of the HO2S and tighten it with a value of 42 N.m (31 lb ft). Connect the HO2S electrical connector for 6.0L, perform the same for 4.8L or 5.3L. If a fuel composition sensor is equipped, connect the HO2S to electrical connector to the fuel line clip, resnap the CPA retainer, and finally, connect the fuel composition sensor electrical connector before lowering the vehicle.

OEM 2006 Chevrolet Silverado 3500 Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oxygen Sensors found

View related parts
2006 Chevrolet Silverado 3500 Oxygen Sensor Part Number: 12572705
$90.49 MSRP: $183.78
You Save: $93.29 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Front Oxygen Sensor
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.1 x 6.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12572705
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
2006 Chevrolet Silverado 3500 Oxygen Sensor, Driver Side Part Number: 19209812
$78.63 MSRP: $147.66
You Save: $69.03 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors
- Position: Driver Side
- Replaces: 19210423, 25333817
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
2006 Chevrolet Silverado 3500 Oxygen Sensor, Driver Side Part Number: 12572707
$70.50 MSRP: $143.19
You Save: $72.69 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Heated Oxygen (Position 3); Sensor, Computer Control Sensors
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.6 x 3.2 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12572707
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 8.1 L GAS
View related parts
2006 Chevrolet Silverado 3500 Oxygen Sensor Part Number: 19209808
$72.40 MSRP: $147.04
You Save: $74.64 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor
- Replaces: 12575389, 19256731, 25333812, 12583806, 19210711, 12573168
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 3500 Submodels:
- Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

2006 Chevrolet Silverado 3500 Oxygen Sensor

With a comprehensive array of OEM 2006 Chevrolet Silverado 3500 Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Silverado 3500 Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Silverado 3500 Oxygen Sensor Parts and Q&A

Q: How to replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2 on 2006 Chevrolet Silverado 3500?
A: To replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2, initially raise and aid the motor vehicle. If equipped, disconnect the fuel composition sensor electrical connector as well as the connector position assurance (CPA) retainer. In case a fuel composition sensor is available, there is need of removing the HO2S from the fuel line clip's electrical connector. For engines with 4.8 liters and 5.3 liters of engine, remove the HO2S electric connector, while for engines that are 6.0L, do the same. Remove the HO2S. During installation, apply anti-seize compound GM P/N 12377953 on the old sensor's threads if it is being reused because new sensors arrive pre-coated. Carry out the installation of the HO2S and tighten it with a value of 42 N.m (31 lb ft). Connect the HO2S electrical connector for 6.0L, perform the same for 4.8L or 5.3L. If a fuel composition sensor is equipped, connect the HO2S to electrical connector to the fuel line clip, resnap the CPA retainer, and finally, connect the fuel composition sensor electrical connector before lowering the vehicle.