How to replace the multifunction turn signal switch on 2006 Chevrolet Monte Carlo?

Before you start changing the turn signal switch you need to follow official steps to deactivate SIR system functions. When removing the upper and lower trim parts disconnect the steering column wire harness assembly connector that comes through the abrasion sleeve for easy reassembly later. End the wire harness connection to its strap and remove the turn signal and multifunction switch assembly from the SIR system coil connector. Pull the two connectors of the turn signal and multifunction switch assembly through the bulkhead connector. Unscrew the two pan head taps and insert the turn signal and multifunction switch assembly from its position in the steering column tilt head. Place the turn signal and multifunction switch assembly on the steering column tilt head assembly so its electrical contact touches the turn signal cancel cam assembly. Fasten the assembly with its two pan head screws while tightening them to 1 Nm (11 inch lbs.). Push each connector through the bulkhead connector and join the signaling switch connector to the SIR coil power source. Secure the abrasion sleeve over the steering column wire harness assembly with proper positioning of ignition lock case wires and connector. Put the wire harness assembly back in position through the wire harness strap then replace upper and lower trim panels before activating the SIR system.

OEM 2006 Chevrolet Monte Carlo Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Turn Signal Switches found

View related parts
2006 Chevrolet Monte Carlo Turn Signal Switch Part Number: 15289426
$67.44 MSRP: $100.37
You Save: $32.93 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Combination Switch; Switch, Turn Signal Lamp
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.4 x 5.0 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15289426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Headlamp Switch Part Number: 25821301
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch
- Replaces: 15929623, 15811644
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.0 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25821301
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Headlamp Switch Part Number: 25821299
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch
- Replaces: 15929625
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.0 x 4.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25821299
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Headlamp Switch Part Number: 25821297
Product Specifications
- Other Name: Multi Purpose Switch; Switch, Headlamp/Fog Lamp/Turn Signal
- Replaces: 15811641, 15929627
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25821297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Monte Carlo Turn Signal Switch

With a comprehensive array of OEM 2006 Chevrolet Monte Carlo Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Monte Carlo Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Monte Carlo Turn Signal Switch Parts and Q&A

Q: How to replace the multifunction turn signal switch on 2006 Chevrolet Monte Carlo?
A: Before you start changing the turn signal switch you need to follow official steps to deactivate SIR system functions. When removing the upper and lower trim parts disconnect the steering column wire harness assembly connector that comes through the abrasion sleeve for easy reassembly later. End the wire harness connection to its strap and remove the turn signal and multifunction switch assembly from the SIR system coil connector. Pull the two connectors of the turn signal and multifunction switch assembly through the bulkhead connector. Unscrew the two pan head taps and insert the turn signal and multifunction switch assembly from its position in the steering column tilt head. Place the turn signal and multifunction switch assembly on the steering column tilt head assembly so its electrical contact touches the turn signal cancel cam assembly. Fasten the assembly with its two pan head screws while tightening them to 1 Nm (11 inch lbs.). Push each connector through the bulkhead connector and join the signaling switch connector to the SIR coil power source. Secure the abrasion sleeve over the steering column wire harness assembly with proper positioning of ignition lock case wires and connector. Put the wire harness assembly back in position through the wire harness strap then replace upper and lower trim panels before activating the SIR system.