How to replace the Fuel Filler Hose on 2006 Chevrolet Malibu?

The replacement process of a malibu sedan fuel filler tube begins with removing the fuel fill cap and fitting caps to stop system contamination from dirt. Start by draining the Fuel Tank before leveraging the fuel filler pipe bolt from the fuel fill pocket. Climb under the car to withdraw the fuel filler pipe attachment screw that connects below the floor. Begin by loosening the Fuel Tank clamp on the filler hose while pulling the hose from the tank before taking out the fuel filler pipe assembly. Position the upper end of the fuel filler pipe inside the fuel filler pocket then fasten it with an attaching screw secured at 10 n.m (89 lb in). You should position the Fuel Filler Hose clamp on both the Fuel Tank and fuel fill tube before tightening it to 4 n.m (35 lb in). Lower the vehicle while inserting the bolt into the fuel filler pocket and tighten it to 1.5 n.m (13 lb in). Finally, install the fuel filler cap.

OEM 2006 Chevrolet Malibu Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Filler Hoses found

View related parts
2006 Chevrolet Malibu Filler Neck Part Number: 25829295
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 15214885
- Item Weight: 1.80 Pounds
- Item Dimensions: 26.9 x 24.6 x 21.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25829295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Filler Neck Part Number: 15860746
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Item Weight: 2.60 Pounds
- Item Dimensions: 28.9 x 26.3 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15860746
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Filler Hose Part Number: 25829296
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Replaces: 10364403
- Item Weight: 1.80 Pounds
- Item Dimensions: 8.0 x 2.4 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25829296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Filler Hose Part Number: 22666263
Product Specifications
- Other Name: Hose, Fuel; Fuel Filler Hose; Hose, Fuel Tank Filler
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 2.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22666263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2006 Chevrolet Malibu Fuel Filler Hose

With a comprehensive array of OEM 2006 Chevrolet Malibu Fuel Filler Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Malibu Fuel Filler Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Malibu Fuel Filler Hose Parts and Q&A

Q: How to replace the Fuel Filler Hose on 2006 Chevrolet Malibu?
A: The replacement process of a malibu sedan fuel filler tube begins with removing the fuel fill cap and fitting caps to stop system contamination from dirt. Start by draining the Fuel Tank before leveraging the fuel filler pipe bolt from the fuel fill pocket. Climb under the car to withdraw the fuel filler pipe attachment screw that connects below the floor. Begin by loosening the Fuel Tank clamp on the filler hose while pulling the hose from the tank before taking out the fuel filler pipe assembly. Position the upper end of the fuel filler pipe inside the fuel filler pocket then fasten it with an attaching screw secured at 10 n.m (89 lb in). You should position the Fuel Filler Hose clamp on both the Fuel Tank and fuel fill tube before tightening it to 4 n.m (35 lb in). Lower the vehicle while inserting the bolt into the fuel filler pocket and tighten it to 1.5 n.m (13 lb in). Finally, install the fuel filler cap.