OEM 2006 Chevrolet Impala Alternator Bracket

2006 Chevrolet Impala Alternator Bracket Parts and Q&A

• Q: How to replace the alternator bracket on 2006 Chevrolet Impala?

  A: Replacement of the generator bracket begins with eliminating the generator and idle pulley before suspending the vehicle in the air. First remove the lower tensioner bolt before rotating the tensioner for access to the generator bracket bolt. After that lower the vehicle. The generator bracket bolts need removal for successful separation of the generator bracket from the stud. To install the generator bracket connect it to the stud while using generator bracket bolts tightened to 50 n.m (37 lb ft). You must raise the vehicle once more to install the lower generator bracket bolt while tightening it to 50 n.m (37 lb ft) followed by the lower tensioner bolt at the same torque rating. After lowering the vehicle install the idler pulley followed by the generator.