How to replace the A/C Clutch assembly on 2006 Chevrolet HHR?

The tools required to change the compressor clutch assembly include Universal Spanner Wrench and Snap Ring Pliers. Take off the compressor and the clutch plate then the snap rings. Install the clutch coil and pulley with oil applied on the shim. Tilter the air gap, clamp up the clutch drive plate bolt and fit back the compressor.

OEM 2006 Chevrolet HHR A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Clutch found

View related parts
2006 Chevrolet HHR Compressor Clutch Part Number: 15923803
Product Specifications
- Other Name: Clutch Kit, Air Conditioner Compressor Clutch; A/C Compressor Clutch; Clutch; Clutch Kit, A/C Compressor Clutch
- Replaces: 22687702
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.0 x 6.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15923803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet HHR Submodels:
- LS, LT, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet HHR A/C Clutch

With a comprehensive array of OEM 2006 Chevrolet HHR A/C Clutch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet HHR A/C Clutch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet HHR A/C Clutch Parts and Q&A

Q: How to replace the A/C Clutch assembly on 2006 Chevrolet HHR?
A: The tools required to change the compressor clutch assembly include Universal Spanner Wrench and Snap Ring Pliers. Take off the compressor and the clutch plate then the snap rings. Install the clutch coil and pulley with oil applied on the shim. Tilter the air gap, clamp up the clutch drive plate bolt and fit back the compressor.