How to replace the trailing arm on 2006 Chevrolet Equinox?

A mechanic must first lift and support the vehicle before replacing its Trailing Arm. Start by removing the Trailing Arm bracket bolts from the body then continue with the Trailing Arm Bushing bolts from the bracket. Disassembly begins with unfastening the Trailing Arm bolts attaching to the knuckle then proceeding to free the park brake cable clip and Trailing Arm. First install the Trailing Arm onto the knuckle before tightening all bolts to 110 nm (81 ft. Lbs.). Loosely mount the Trailing Arm Bushing to bracket nut and bolt after placing the bracket to the Trailing Arm. Push the Trailing Arm upward while installing the front bolt with loose tension but complete alignment with a drift on the other bolts. Tighten the Trailing Arm bracket to body bolts to 110 nm (81 ft. Lbs.) secure the Trailing Arm Bushing to bracket nut and bolt by applying 160 nm (118 ft. Lbs.) torque. Finally, install the park brake cable clip and tighten the bolt to 25 nm (18 ft. Lbs.) before lowering the vehicle.

OEM 2006 Chevrolet Equinox Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Trailing Arms found

View related parts
2006 Chevrolet Equinox Upper Control Arm, Rear Part Number: 22689676
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm; Control Arm
- Position: Rear
- Item Weight: 1.80 Pounds
- Item Dimensions: 45.1 x 15.8 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22689676
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Lower Control Arm, Rear Passenger Side Part Number: 15228794
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm; Control Arm
- Position: Rear Passenger Side
- Item Weight: 11.70 Pounds
- Item Dimensions: 22.1 x 12.0 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15228794
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2006 Chevrolet Equinox Lower Control Arm, Rear Driver Side Part Number: 15228793
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm; Control Arm
- Position: Rear Driver Side
- Item Weight: 8.40 Pounds
- Item Dimensions: 27.0 x 12.8 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15228793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS

2006 Chevrolet Equinox Trailing Arm

With a comprehensive array of OEM 2006 Chevrolet Equinox Trailing Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Trailing Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Trailing Arm Parts and Q&A

Q: How to replace the trailing arm on 2006 Chevrolet Equinox?
A: A mechanic must first lift and support the vehicle before replacing its Trailing Arm. Start by removing the Trailing Arm bracket bolts from the body then continue with the Trailing Arm Bushing bolts from the bracket. Disassembly begins with unfastening the Trailing Arm bolts attaching to the knuckle then proceeding to free the park brake cable clip and Trailing Arm. First install the Trailing Arm onto the knuckle before tightening all bolts to 110 nm (81 ft. Lbs.). Loosely mount the Trailing Arm Bushing to bracket nut and bolt after placing the bracket to the Trailing Arm. Push the Trailing Arm upward while installing the front bolt with loose tension but complete alignment with a drift on the other bolts. Tighten the Trailing Arm bracket to body bolts to 110 nm (81 ft. Lbs.) secure the Trailing Arm Bushing to bracket nut and bolt by applying 160 nm (118 ft. Lbs.) torque. Finally, install the park brake cable clip and tighten the bolt to 25 nm (18 ft. Lbs.) before lowering the vehicle.