How to replace the blower motor on 2006 Chevrolet Equinox?

To install the blower motor, unplug the electrical connector and take the screws of the blower motor off the HVAC module and then pull the motor out. On the part of installation, insert the motor again in the HVAC module, screw it to the module, and tighten the screws. Lastly, reconnect the electrical connector with the motor.

OEM 2006 Chevrolet Equinox Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2006 Chevrolet Equinox Blower Motor Part Number: 22896430
$172.40 MSRP: $510.28
You Save: $337.88 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Air Conditioner Evaporator Blower; HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 25952810, 15781505
- Item Weight: 3.70 Pounds
- Item Dimensions: 12.6 x 11.6 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22896430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Equinox Submodels:
- L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2006 Chevrolet Equinox Blower Motor

With a comprehensive array of OEM 2006 Chevrolet Equinox Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Equinox Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Equinox Blower Motor Parts and Q&A

Q: How to replace the blower motor on 2006 Chevrolet Equinox?
A: To install the blower motor, unplug the electrical connector and take the screws of the blower motor off the HVAC module and then pull the motor out. On the part of installation, insert the motor again in the HVAC module, screw it to the module, and tighten the screws. Lastly, reconnect the electrical connector with the motor.