How to replace the fuel pressure sensor on 2006 Chevrolet Corvette?

In order to change Fuel Tank Pressure Sensor, the right rear wheelhouse panel and EVAP canister access cover should be taken off. Disassemble the electrical connector of sensor and force it open. Rub the grommet of the new sensor with engine oil, fit, replace the electrical connector and put the covers back in place.

OEM 2006 Chevrolet Corvette Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2006 Chevrolet Corvette Fuel Pressure Regulator, Passenger Side Part Number: 16238399
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2006 Chevrolet Corvette Fuel Pressure Sensor

With a comprehensive array of OEM 2006 Chevrolet Corvette Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Corvette Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Corvette Fuel Pressure Sensor Parts and Q&A

Q: How to replace the fuel pressure sensor on 2006 Chevrolet Corvette?
A: In order to change Fuel Tank Pressure Sensor, the right rear wheelhouse panel and EVAP canister access cover should be taken off. Disassemble the electrical connector of sensor and force it open. Rub the grommet of the new sensor with engine oil, fit, replace the electrical connector and put the covers back in place.