How to replace the front shock absorber assembly on 2006 Chevrolet Cobalt?

Start the strut assembly replacement by untightening the upper mounting nuts of the strut. Only frame-contact vehicle lifts should be used to elevate the vehicle because using suspension-contact lifts must be strictly avoided. After lifting the vehicle for support and wheel removal you need to disconnect the stabilizer shaft link from the strut assembly. Begin by removing the strut lower assembly bolts and nuts and antilock brake system wiring bracket when present then proceed to take the strut unit out. The first step for installation requires mounting the strut but requiring strict compliance with the fastener notice in service precautions. Install and tighten the upper mounting nuts on the strut to 20 nm (15 ft. Lbs.). The prevailing torque fastener can be used again under these conditions: both fasteners must be rust-free and debris-free and the torque/drag resistance of the fastener needs to exceed 3 nm (27 inch lbs.) during seating. Whenever the necessary conditions fail to be met you need to replace the fastener. The next installation step involves mounting strut lower bolts, nuts, and an abs wiring bracket. Tighten the lower nuts to 120 nm (89 ft. Lbs.). Attach the stabilizer shaft link to the strut assembly before tightening the nut to 65 nm (48 ft. Lbs.). Vehicle owners should now install tires and wheels on their vehicle before lowering it properly for final front wheel alignment.

OEM 2006 Chevrolet Cobalt Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2006 Chevrolet Cobalt Strut, Front Driver Side Part Number: 20794267
$143.57 MSRP: $259.84
You Save: $116.27 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15247243, 88964331, 15798897, 15876215
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.2 x 8.2 x 25.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Strut, Front Passenger Side Part Number: 20794268
$129.74 MSRP: $243.64
You Save: $113.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15876216, 15247244, 15798898
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.5 x 9.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Shock Absorber Part Number: 22696400
$68.83 MSRP: $133.58
You Save: $64.75 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 19.5 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22696400
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Strut, Driver Side Part Number: 19181251
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Driver Side
- Replaces: 15247245, 19181044
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.2 x 8.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Strut, Passenger Side Part Number: 19181631
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Passenger Side
- Replaces: 15247246, 19181043
- Item Weight: 8.20 Pounds
- Item Dimensions: 9.1 x 8.2 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Shock Absorber Part Number: 10368516
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 5.3 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10368516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Shock Absorber Part Number: 22728821
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Shock Absorber Set; Strut Shock Kit.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.50 Pounds
- Item Dimensions: 19.1 x 5.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22728821
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Shock Absorber

With a comprehensive array of OEM 2006 Chevrolet Cobalt Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Shock Absorber Parts and Q&A

Q: How to replace the front shock absorber assembly on 2006 Chevrolet Cobalt?
A: Start the strut assembly replacement by untightening the upper mounting nuts of the strut. Only frame-contact vehicle lifts should be used to elevate the vehicle because using suspension-contact lifts must be strictly avoided. After lifting the vehicle for support and wheel removal you need to disconnect the stabilizer shaft link from the strut assembly. Begin by removing the strut lower assembly bolts and nuts and antilock brake system wiring bracket when present then proceed to take the strut unit out. The first step for installation requires mounting the strut but requiring strict compliance with the fastener notice in service precautions. Install and tighten the upper mounting nuts on the strut to 20 nm (15 ft. Lbs.). The prevailing torque fastener can be used again under these conditions: both fasteners must be rust-free and debris-free and the torque/drag resistance of the fastener needs to exceed 3 nm (27 inch lbs.) during seating. Whenever the necessary conditions fail to be met you need to replace the fastener. The next installation step involves mounting strut lower bolts, nuts, and an abs wiring bracket. Tighten the lower nuts to 120 nm (89 ft. Lbs.). Attach the stabilizer shaft link to the strut assembly before tightening the nut to 65 nm (48 ft. Lbs.). Vehicle owners should now install tires and wheels on their vehicle before lowering it properly for final front wheel alignment.