How to replace the ignition coil on 2006 Chevrolet Aveo?

Begin by disconnecting the negative Battery Cable following safety procedures from the battery disconnect caution. Start by disconnecting the electronic ignition (EI) system Ignition Coil connector then mark the ignition wire position before removing this wire. Before fitting the new ei system Ignition Coil you must remove its retaining nuts then extract the coil from its position. Insert the ei system Ignition Coil into its designated mount then fasten it with the retaining nuts until they reach 10 n.m (89 lb in) torque. Reconnect the ei system Ignition Coil connector as your next step before reinstalling the negative Battery Cable.

OEM 2006 Chevrolet Aveo Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2006 Chevrolet Aveo Ignition Coil Part Number: 25182496
$105.15 MSRP: $216.06
You Save: $110.91 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 96253555
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.4 x 4.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25182496
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2006 Chevrolet Aveo Ignition Coil

With a comprehensive array of OEM 2006 Chevrolet Aveo Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Aveo Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Aveo Ignition Coil Parts and Q&A

Q: How to replace the ignition coil on 2006 Chevrolet Aveo?
A: Begin by disconnecting the negative Battery Cable following safety procedures from the battery disconnect caution. Start by disconnecting the electronic ignition (EI) system Ignition Coil connector then mark the ignition wire position before removing this wire. Before fitting the new ei system Ignition Coil you must remove its retaining nuts then extract the coil from its position. Insert the ei system Ignition Coil into its designated mount then fasten it with the retaining nuts until they reach 10 n.m (89 lb in) torque. Reconnect the ei system Ignition Coil connector as your next step before reinstalling the negative Battery Cable.