How to replace the instrument panel dimmer switch on 2006 Cadillac STS?

Replace the instrument panel dimmer switch by starting with the removal of I/P cluster trim, then take off the switch tabs, and unplug the connectors. To install, put the switch into the tabs holding the I/P dimmer switch in place, connect the wires, and after that, fit the I/P cluster trim.

OEM 2006 Cadillac STS Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2006 Cadillac STS Turn Signal Switch Part Number: 20808029
$76.80 MSRP: $119.93
You Save: $43.13 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Turn Signal Lamp; Multi Purpose Switch; Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Headlamp Dimmer
- Replaces: 01999391, 1999391
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.2 x 5.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20808029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2006 Cadillac STS Dimmer Switch

With a comprehensive array of OEM 2006 Cadillac STS Dimmer Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac STS Dimmer Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac STS Dimmer Switch Parts and Q&A

Q: How to replace the instrument panel dimmer switch on 2006 Cadillac STS?
A: Replace the instrument panel dimmer switch by starting with the removal of I/P cluster trim, then take off the switch tabs, and unplug the connectors. To install, put the switch into the tabs holding the I/P dimmer switch in place, connect the wires, and after that, fit the I/P cluster trim.