How to replace the rear suspension sway bar link on 2006 Cadillac SRX?

Start by elevating and supporting the car before you uninstall the tire and wheel from the designated position. The use of a hex tool to hold the shaft link stud will protect the link seal when removing the Sway Bar Link retaining nuts. The next step requires you to remove the Sway Bar Link from its connections between the sway bar and lower Control Arm. The installation process demands initial attachment of the Sway Bar Link to the lower Control Arm before joining it to the sway bar. A hex tool should be used to hold the shaft link stud while installing Sway Bar Link retaining nuts so the link seal does not get damaged. Tighten these nuts to 90 nm (67 ft. Lbs.). Complete the process by putting back the tire then wheel before raising the vehicle.

OEM 2006 Cadillac SRX Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2006 Cadillac SRX Stabilizer Link, Rear Passenger Side Part Number: 15895320
$16.69 MSRP: $31.35
You Save: $14.66 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
- Position: Rear Passenger Side
- Replaces: 25768312, 15840472
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.4 x 3.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15895320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac SRX Stabilizer Link Part Number: 15231140
$77.81 MSRP: $140.85
You Save: $63.04 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Front
- Replaces: 25768143
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.8 x 6.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15231140
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac SRX Stabilizer Link, Rear Driver Side Part Number: 15895319
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
- Position: Rear Driver Side
- Replaces: 25768311, 15840471
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.4 x 3.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15895319
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2006 Cadillac SRX Sway Bar Link

With a comprehensive array of OEM 2006 Cadillac SRX Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac SRX Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac SRX Sway Bar Link Parts and Q&A

Q: How to replace the rear suspension sway bar link on 2006 Cadillac SRX?
A: Start by elevating and supporting the car before you uninstall the tire and wheel from the designated position. The use of a hex tool to hold the shaft link stud will protect the link seal when removing the Sway Bar Link retaining nuts. The next step requires you to remove the Sway Bar Link from its connections between the sway bar and lower Control Arm. The installation process demands initial attachment of the Sway Bar Link to the lower Control Arm before joining it to the sway bar. A hex tool should be used to hold the shaft link stud while installing Sway Bar Link retaining nuts so the link seal does not get damaged. Tighten these nuts to 90 nm (67 ft. Lbs.). Complete the process by putting back the tire then wheel before raising the vehicle.