ChevyParts
My Garage
My Account
Cart
OEM 2006 Cadillac SRX Differential
Front Differential- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Differentials found
2006 Cadillac SRX Differential Carrier Part Number: 19178783
$248.03 MSRP: $1369.94You Save: $1121.91 (82%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Carrier Assembly, Differential (3.73 Ratio); Carrier, Final Drive; Differential
- Replaces: 15143804, 25771601
- Item Weight: 66.90 Pounds
- Item Dimensions: 18.2 x 20.0 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19178783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Differential Case Part Number: 19133287
Product Specifications- Other Name: Differential; Gear Assembly
- Item Weight: 18.40 Pounds
- Item Dimensions: 8.9 x 8.7 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133287
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Carrier Assembly, Front Part Number: 25978167
$2141.91 MSRP: $2756.64You Save: $614.73 (23%)Product Specifications- Other Name: Carrier Assembly-Front Differential; Carrier; Carrier, Final Drive; Differential
- Position: Front
- Replaces: 25714854, 25868432
- Item Weight: 43.40 Pounds
- Item Dimensions: 20.3 x 18.0 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25978167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Differential Carrier Part Number: 25978162
Product Specifications- Other Name: Carrier Assembly-Differential (3.23 Ratio); Carrier Assembly; Carrier; Carrier, Final Drive; Differential
- Replaces: 19181225, 15793715, 25862519
- Item Weight: 76.30 Pounds
- Item Dimensions: 24.7 x 22.4 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25978162
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Differential Carrier Part Number: 25978161
Product Specifications- Other Name: Carrier Assembly-Differential (3.23 Ratio); Carrier Assembly; Carrier; Carrier, Final Drive; Differential
- Replaces: 25862518, 15793713
- Item Weight: 63.90 Pounds
- Item Dimensions: 19.9 x 18.2 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25978161
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Differential Carrier Part Number: 19178779
Product Specifications- Other Name: Carrier Assembly, Differential (3.90 Ratio); Carrier, Final Drive; Differential
- Replaces: 15208641, 15793719, 19181226
- Item Weight: 67.20 Pounds
- Item Dimensions: 20.5 x 18.4 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19178779
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Carrier Assembly, Front Part Number: 25978168
Product Specifications- Other Name: Carrier Assembly-Front Differential; Carrier; Carrier, Final Drive; Differential
- Position: Front
- Replaces: 12573042, 19181235, 25873547
- Item Weight: 53.00 Pounds
- Item Dimensions: 20.4 x 18.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25978168
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Differential Carrier Part Number: 19133286
Product Specifications- Other Name: Differential, Differential Side With Pinion; Differential Case; Gear Assembly; Carrier; Differential; Differential, Differential Side; Differential
- Replaces: 89048203, 89059049
- Item Weight: 14.70 Pounds
- Item Dimensions: 10.6 x 8.9 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133286
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Cadillac SRX Differential
With a comprehensive array of OEM 2006 Cadillac SRX Differential, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac SRX Differential are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Cadillac SRX Differential Parts and Q&A
- Q: How to assemble the differential carrier on 2006 Cadillac SRX?A: To put this Differential carrier together, first use bearing grease to secure the gear and washer in the Differential carrier, followed by lateral axle side gears (107) and washers (106). Then, put in the washers (108) on the pinion gears (109) and put the pinion in the Differential carrier (104) next to each other and across from each other aligning the center Differential shaft (103). Slowly rotate the gear will be aligned then insert the Differential shaft (103) and the matched hole in Differential case (104) and pinion gears (109). Install the bolts with the heads uninstalled to guide into the gear bolt holes and not press too much on to the Differential causing the damage to the gear teeth. Then use a press and the pin ion cone and side bearing installer (J 24 433) to press the ring gear (105) on to the Differential. Replace the guide pin with new ring gear bolts and tighten them to 67 nm (49 ft. Lbs) in criss-cross-pattern. Two different types of bearings fish in place on the drive pinion shaft (111) using the pinion cone and side bearing installer (J 24433) and a hydraulic press, are it's the pinion head bearing onto the drive pinion gear (111), thus, assemble the drive pinion shaft (111) and pinion bearing spacer through the pinion bearing housing with tail bearing over the pinion shaft to press the bearing onto the pinion shaft, with the pinion cone and side bearing installer (J 24433) and a hydraulic press. Install a new pinion seal with the help of pinion sealer (J 46262), and put the pinion flange on the shaft and a new pinion nut . With the use of the pinion flange holder (J 45012), hold the flange with a breaker bar and tighten the pinion flange nut to 241 nm (178 ft. Lbs.) torque wrench and injector nozzle socket 30mm (J 29873). Install stub shaft seal using stub shaft seal installer (J 46265) and universal driver handle (J 8092) and place the selected shims on pinion housing and install the o-ring in the groove on pinion housing. Check the bearing housing and carrier pinion housing bore for nicks or burrs. Use a light coat of gear lube to facilitate installation. Heat the carrier with heat gun (J 25070), align the housing bolt hole to the carrier bolt hole using the long bolts of flange and pinion cage remover (J 45019) as pointer, tighten the bolts, and then press the housing evenly to the bore before taking out the long bolts to put in pinion housing bolts tight, torque to 29 nm (21 ft. Lbs.). Insert the Differential assembly (100) into the Differential carrier, lightly coat the outer diameter of the oil seal may with axle lube, and use the output shaft seal installer (J 45017) to install the oil seal. Fit the carrier cover o-ring into its groove; apply a light coat of gear lube to the o-ring region; move the bolt holes into line with one another; and force the cover onto the Differential carrier evenly, starting thread of the cover bolts by hand, and finish tightening them to 29 nm (21 ft. Lbs.) in a criss-cross pattern. Finally, install the Drain Plug and tighten it 39 nm (29 ft. Lbs.), then after axle and half shaft are installed in the vehicle fill the axle with Differential lube gl75w90 gm p/n 12378261 (Canadian p/n 10953455) or equivalent and fill to the bottom of fill plug threads before installing and tightening with 39 nm (29 ft. Lbs.) plug to the fill plug.
Related 2006 Cadillac SRX Parts
2006 Cadillac SRX Drive Shaft
2006 Cadillac SRX CV Boot
2006 Cadillac SRX CV Joint
2006 Cadillac SRX Differential Cover
2006 Cadillac SRX Differential Seal