How to replace the rear bumper fascia on 2006 Cadillac SRX?

Begin by removing the rear wheelhouse liner with push-in retainers and proceed with opening the liftgate. You must first remove the bolts which secure the fascia to the rear end panel in addition to the bolts which attach the fascia to the horizontal joint of the quarter panel . The fascia should slide backward to separate from its position at the rear bumper brackets and demand the disconnected of electrical power supply if present. You should position the fascia against the body while connecting electrical connector for cases where present. Fully press the fascia against the quarter panel and proceed to install the bolts to the rear end panel at 6 N.m (53 lb in). Place the fascia with its horizontal joint facing the quarter panel and attach the bolts before tightening each one to 3 N.m (27 lb in). After finishing the process secure the fascia at the rear impact bar using push-in retainers. Reinstall the rear wheelhouse liner and close the liftgate.

OEM 2006 Cadillac SRX Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Bumpers found

View related parts
2006 Cadillac SRX Bumper Cover Part Number: 19121106
$348.75 MSRP: $494.78
You Save: $146.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 12336049, 89024820
- Item Weight: 10.50 Pounds
- Item Dimensions: 76.7 x 26.3 x 24.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19121106
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac SRX Bumper Cover Part Number: 12335713
$328.59 MSRP: $491.26
You Save: $162.67 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Item Weight: 8.70 Pounds
- Item Dimensions: 75.6 x 32.7 x 16.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12335713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac SRX Bumper Cover Part Number: 19121107
$441.48 MSRP: $660.05
You Save: $218.57 (34%)
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 89024819, 12336048
- Item Weight: 10.60 Pounds
- Item Dimensions: 79.0 x 24.0 x 26.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19121107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2006 Cadillac SRX Bumper

With a comprehensive array of OEM 2006 Cadillac SRX Bumper, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac SRX Bumper are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac SRX Bumper Parts and Q&A

Q: How to replace the rear bumper fascia on 2006 Cadillac SRX?
A: Begin by removing the rear wheelhouse liner with push-in retainers and proceed with opening the liftgate. You must first remove the bolts which secure the fascia to the rear end panel in addition to the bolts which attach the fascia to the horizontal joint of the quarter panel . The fascia should slide backward to separate from its position at the rear bumper brackets and demand the disconnected of electrical power supply if present. You should position the fascia against the body while connecting electrical connector for cases where present. Fully press the fascia against the quarter panel and proceed to install the bolts to the rear end panel at 6 N.m (53 lb in). Place the fascia with its horizontal joint facing the quarter panel and attach the bolts before tightening each one to 3 N.m (27 lb in). After finishing the process secure the fascia at the rear impact bar using push-in retainers. Reinstall the rear wheelhouse liner and close the liftgate.