How to replace the right engine mount on 2006 Buick Terraza?

Starting the right Engine Mount replacement requires you to detach the throttle body air inlet duct along with Engine Mount struts combined with removing the right front wheel and tire after which you must raise and support the vehicle. Start by removing first the Catalytic Converter from engine Exhaust Manifold after taking out the right engine splash shield then move to the Engine Mount lower nuts. A block of wood should be inserted between the Oil Pan and jack support before engine use of a utility stand along with the wood block to raise the motor. Disassemble the bracket-to-oil pan bolt association followed by disuniting the Engine Mount from the bracket while also extracting the mount and bracket from their association. Start by connecting the Engine Mount to the Engine Mount bracket and inserting the bracket with mount to the Oil Pan while torquing the bracket-to-oil pan bolts to 58 nm (43 ft. Lbs.). Use a utility stand to lower the engine before installing the mount lower nuts with a torque of 47 nm (35 ft. Lbs.). Clean installation of the right engine splash shield and right front wheel with tire must occur before attaching the Catalytic Converter pipe to the engine Exhaust Manifold and completing the process with Engine Mount struts and throttle body air inlet duct installation.

OEM 2006 Buick Terraza Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Engine Mounts found

View related parts
2006 Buick Terraza Strut Part Number: 10345905
$79.45 MSRP: $135.26
You Save: $55.81 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut, Engine Mounting
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.4 x 5.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Strut Bracket Part Number: 10274661
$177.35 MSRP: $301.93
You Save: $124.58 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Front Bracket; Engine Mount
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.1 x 4.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10274661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Motor Mount Part Number: 10448575
$69.62 MSRP: $118.53
You Save: $48.91 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Mount Bracket Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Strut Bracket, Passenger Side Part Number: 12577766
$24.60 MSRP: $40.55
You Save: $15.95 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 4.4 x 4.3 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Strut Part Number: 10247084
$37.86 MSRP: $91.28
You Save: $53.42 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.8 x 3.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10247084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Mount Bracket, Passenger Side Part Number: 12570317
$18.16 MSRP: $59.40
You Save: $41.24 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Item Weight: 5.90 Pounds
- Item Dimensions: 13.4 x 5.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12570317
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS
View related parts
2006 Buick Terraza Mount Bracket Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Lower Bracket Part Number: 10325272
Product Specifications
- Other Name: Bracket, Engine Mounting; Motor Mount
- Item Weight: 2.00 Pounds
- Item Dimensions: 10.7 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10325272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS

2006 Buick Terraza Engine Mount

With a comprehensive array of OEM 2006 Buick Terraza Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Terraza Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Terraza Engine Mount Parts and Q&A

Q: How to replace the right engine mount on 2006 Buick Terraza?
A: Starting the right Engine Mount replacement requires you to detach the throttle body air inlet duct along with Engine Mount struts combined with removing the right front wheel and tire after which you must raise and support the vehicle. Start by removing first the Catalytic Converter from engine Exhaust Manifold after taking out the right engine splash shield then move to the Engine Mount lower nuts. A block of wood should be inserted between the Oil Pan and jack support before engine use of a utility stand along with the wood block to raise the motor. Disassemble the bracket-to-oil pan bolt association followed by disuniting the Engine Mount from the bracket while also extracting the mount and bracket from their association. Start by connecting the Engine Mount to the Engine Mount bracket and inserting the bracket with mount to the Oil Pan while torquing the bracket-to-oil pan bolts to 58 nm (43 ft. Lbs.). Use a utility stand to lower the engine before installing the mount lower nuts with a torque of 47 nm (35 ft. Lbs.). Clean installation of the right engine splash shield and right front wheel with tire must occur before attaching the Catalytic Converter pipe to the engine Exhaust Manifold and completing the process with Engine Mount struts and throttle body air inlet duct installation.