How to replace the ignition lock cylinder on 2006 Buick Lucerne?

In order to change the ignition lock cylinder, un-wire the battery negative cable and turn off the SIR system. Unscrew the steering wheel and trim covers and find the lock cylinder. Allow the release and dislodge the cylinder with a bent-tip awl. Installation To install the components again by aligning and fixing, and then reconnect the battery.

OEM 2006 Buick Lucerne Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2006 Buick Lucerne Ignition Lock Cylinder Part Number: 15794826
$80.89 MSRP: $126.71
You Save: $45.82 (37%)
Product Specifications
- Other Name: Cylinder Kit Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder; Cylinder, Ignition Switch
- Replaces: 19120038, 25756079
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15794826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne Ignition Lock Cylinder

With a comprehensive array of OEM 2006 Buick Lucerne Ignition Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne Ignition Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Ignition Lock Cylinder Parts and Q&A

Q: How to replace the ignition lock cylinder on 2006 Buick Lucerne?
A: In order to change the ignition lock cylinder, un-wire the battery negative cable and turn off the SIR system. Unscrew the steering wheel and trim covers and find the lock cylinder. Allow the release and dislodge the cylinder with a bent-tip awl. Installation To install the components again by aligning and fixing, and then reconnect the battery.