How to replace the front brake line on 2006 Buick Lucerne?

Before changing the front brake hose, raise the car and take off the tire and wheel. Wash any dirt off the brake hose and all brake pipe fittings, then fit a rubber cap or plug to the exposed brake pipe fitting so fluid isn't lost or gets dirty. Take the brake pipe fitting off the brake hose, and then use a flat-bladed tool to pry the retainer away. Remove the brake hose from both the bracket and the brake caliper, and throw out the two copper hose gaskets that could be stuck on the caliper or hose end. Put a rubber plug in the brake hose bolt opening of the caliper so fluid does not leak out. Take out the hose bracket bolt from the strut assembly and pull the hose off. When you install the hose, take out the rubber plug from the caliper, fit new copper gaskets to the brake hose bolt, and screw on the gaskets as well. Put the brake hose bolt in the caliper and make sure to tighten it to 40 nm (30 ft. Lbs.), so there is no twisting or kinking of the hose. Join the brake hose to the bracket, and then put the hose retainer in place. Take off the rubber cap from the brake pipe and attach it to the brake hose, tightening it until you've reached 15 nm (11 ft. Lbs.). Install the hose bracket and bolt onto the strut assembly, and make sure to tighten it to 17 nm (13 ft. Lbs.). After that, bleed the brake caliper using the bleeder screw, then put the wheel and tire back on the car.

OEM 2006 Buick Lucerne Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2006 Buick Lucerne Flex Hose, Front Passenger Side Part Number: 19366678
$30.73 MSRP: $57.67
You Save: $26.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15850972
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 2.1 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Flex Hose, Front Driver Side Part Number: 19366720
$28.37 MSRP: $53.27
You Save: $24.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15937523
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 2.0 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Flex Hose, Rear Driver Side Part Number: 19366676
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15283581
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366676
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Buick Lucerne Flex Hose, Rear Passenger Side Part Number: 19366677
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 15283582
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne Brake Line

With a comprehensive array of OEM 2006 Buick Lucerne Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Brake Line Parts and Q&A

Q: How to replace the front brake line on 2006 Buick Lucerne?
A: Before changing the front brake hose, raise the car and take off the tire and wheel. Wash any dirt off the brake hose and all brake pipe fittings, then fit a rubber cap or plug to the exposed brake pipe fitting so fluid isn't lost or gets dirty. Take the brake pipe fitting off the brake hose, and then use a flat-bladed tool to pry the retainer away. Remove the brake hose from both the bracket and the brake caliper, and throw out the two copper hose gaskets that could be stuck on the caliper or hose end. Put a rubber plug in the brake hose bolt opening of the caliper so fluid does not leak out. Take out the hose bracket bolt from the strut assembly and pull the hose off. When you install the hose, take out the rubber plug from the caliper, fit new copper gaskets to the brake hose bolt, and screw on the gaskets as well. Put the brake hose bolt in the caliper and make sure to tighten it to 40 nm (30 ft. Lbs.), so there is no twisting or kinking of the hose. Join the brake hose to the bracket, and then put the hose retainer in place. Take off the rubber cap from the brake pipe and attach it to the brake hose, tightening it until you've reached 15 nm (11 ft. Lbs.). Install the hose bracket and bolt onto the strut assembly, and make sure to tighten it to 17 nm (13 ft. Lbs.). After that, bleed the brake caliper using the bleeder screw, then put the wheel and tire back on the car.