How to Service and Repair the Blower Motor on 2006 Buick LaCrosse?

Removal To change the blower motor, unscrew the right side tool panel insulator, disconnect the electrical connector, and dissolve the fastening screws. Installation of the new motor should be done using screws, reconnecting the electrical connector, and replacing the instrument panel insulator.

OEM 2006 Buick LaCrosse Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2006 Buick LaCrosse Blower Motor Part Number: 22792042
$128.40 MSRP: $263.86
You Save: $135.46 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower; HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 10335283
- Item Weight: 5.50 Pounds
- Item Dimensions: 14.3 x 14.1 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22792042
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2006 Buick LaCrosse Blower Motor

With a comprehensive array of OEM 2006 Buick LaCrosse Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick LaCrosse Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick LaCrosse Blower Motor Parts and Q&A

Q: How to Service and Repair the Blower Motor on 2006 Buick LaCrosse?
A: Removal To change the blower motor, unscrew the right side tool panel insulator, disconnect the electrical connector, and dissolve the fastening screws. Installation of the new motor should be done using screws, reconnecting the electrical connector, and replacing the instrument panel insulator.