How to replace the Air Bag Clockspring in the steering wheel module on 2005 GMC Savana 3500?

In order to change the Air Bag Clock Spring, turn off the SIR System and make sure that the wheels are straight. Take out the steering wheel and trim covers, and un-clip harness straps on wire harness, and remove old Clock Spring. Install the new assembly which should be aligned in the middle and reattach the trim covers and steering wheel.

OEM 2005 GMC Savana 3500 Air Bag Clockspring

Steering Wheel Airbag Coil

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Clockspring found

View related parts
2005 GMC Savana 3500 Clockspring Part Number: 26097597
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.0 x 5.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26097597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2005 GMC Savana 3500 Air Bag Clockspring

With a comprehensive array of OEM 2005 GMC Savana 3500 Air Bag Clockspring, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 3500 Air Bag Clockspring are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Savana 3500 Air Bag Clockspring Parts and Q&A

Q: How to replace the Air Bag Clockspring in the steering wheel module on 2005 GMC Savana 3500?
A: In order to change the Air Bag Clock Spring, turn off the SIR System and make sure that the wheels are straight. Take out the steering wheel and trim covers, and un-clip harness straps on wire harness, and remove old Clock Spring. Install the new assembly which should be aligned in the middle and reattach the trim covers and steering wheel.