How to replace the Steering Column Seal on the intermediate shaft on 2005 Chevrolet Venture?

In order to change the seal that is on the intermediate steering shaft, one has to turn off the ignition and get rid of the key. Disassemble the intermediate shaft, fold up and remove the seal bolts. Install the upside seal, and the lower seal. Reattach the shaft, and fit the seal and screw the bolts.

OEM 2005 Chevrolet Venture Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Column Seals found

View related parts
2005 Chevrolet Venture Upper Seal Part Number: 10250625
Product Specifications
- Other Name: Seal, Steering Column; Intermed Shaft Seal; Shield
- Position: Upper
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.6 x 7.0 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10250625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Venture Lower Seal Part Number: 26049464
Product Specifications
- Other Name: Seal, Steering Gear Shaft; Cover Seal; Speed Sensor Seal; Seal; O-Ring
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26049464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Steering Column Seal

With a comprehensive array of OEM 2005 Chevrolet Venture Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Steering Column Seal Parts and Q&A

Q: How to replace the Steering Column Seal on the intermediate shaft on 2005 Chevrolet Venture?
A: In order to change the seal that is on the intermediate steering shaft, one has to turn off the ignition and get rid of the key. Disassemble the intermediate shaft, fold up and remove the seal bolts. Install the upside seal, and the lower seal. Reattach the shaft, and fit the seal and screw the bolts.