How to Service and Repair the Coolant Reservoir on 2005 Chevrolet Malibu?

The water to replace the coolant reservoir should be drained and the inlet hose taken off. Curve the mounting tabs to disconnect it and unplug the sensor connector. Unscrew the outlet hose and the reservoir. To install it, fit the outlet hose, reconnect the sensor and fit the reservoir then recombine the inlet hose and fill the coolant.

OEM 2005 Chevrolet Malibu Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2005 Chevrolet Malibu Recovery Tank Part Number: 15793368
Product Specifications
- Other Name: Container, Heater Coolant Tank; Coolant Reservoir; Reservoir; Tank, Engine Coolant Recovery
- Replaces: 22734420, 22627235
- Item Weight: 4.10 Pounds
- Item Dimensions: 15.3 x 12.6 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15793368
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Malibu Submodels:
- Base, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2005 Chevrolet Malibu Coolant Reservoir

With a comprehensive array of OEM 2005 Chevrolet Malibu Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Malibu Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Malibu Coolant Reservoir Parts and Q&A

Q: How to Service and Repair the Coolant Reservoir on 2005 Chevrolet Malibu?
A: The water to replace the coolant reservoir should be drained and the inlet hose taken off. Curve the mounting tabs to disconnect it and unplug the sensor connector. Unscrew the outlet hose and the reservoir. To install it, fit the outlet hose, reconnect the sensor and fit the reservoir then recombine the inlet hose and fill the coolant.