How to Ensure Safe and Effective Spark Plug Replacement on 2005 Chevrolet Colorado?

To install or replace spark plugs, take off ignition coils and clean off the recesses using low pressure air, with the safety glasses on. Wash-up the place to avoid dirt getting into the cylinder head. Wait until the engine cools, check the disengaged plugs and make sure the new ones fit the gap requirements. Install and screw the plugs, and install again the ignition coils.

OEM 2005 Chevrolet Colorado Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Spark Plug found

View related parts
2005 Chevrolet Colorado Spark Plug Part Number: 12681663
$9.22 MSRP: $16.46
You Save: $7.24 (44%)
ADD TO CART
Product Specifications
- Other Name: Spark Plug Assembly-Gasoline Engine Ignition; Spark Plug, Spark Ignition; Spark Plug,Glow
- Replaces: 12598004, 12625058
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.8 x 3.4 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12681663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2005 Chevrolet Colorado Spark Plug

With a comprehensive array of OEM 2005 Chevrolet Colorado Spark Plug, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Colorado Spark Plug are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Colorado Spark Plug Parts and Q&A

Q: How to Ensure Safe and Effective Spark Plug Replacement on 2005 Chevrolet Colorado?
A: To install or replace spark plugs, take off ignition coils and clean off the recesses using low pressure air, with the safety glasses on. Wash-up the place to avoid dirt getting into the cylinder head. Wait until the engine cools, check the disengaged plugs and make sure the new ones fit the gap requirements. Install and screw the plugs, and install again the ignition coils.