How to replace the Steering Column Seal on the intermediate shaft on 2005 Cadillac SRX?

Service teams need to follow the sir caution in service precautions before performing intermediate Steering Shaft seal replacement. The upper intermediate shaft remains attached as the Steering Column gets extracted. Next remove the Steering Column then extract the intermediate shaft seal from the mod plate. Install the new intermediate shaft seal onto the mod plate so it forms an adequate seal between the intermediate shaft seal and the mod plate. Reinstall the Steering Column and refer to the sir disabling and enabling zone 3 in air bags and seat belts for system activation instructions.

OEM 2005 Cadillac SRX Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column Seal found

View related parts
2005 Cadillac SRX Lower Cover Part Number: 26077651
Product Specifications
- Other Name: Seal, Steering Column; Coupling Shield; Seal; Cover; Boot
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.5 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26077651
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac SRX Steering Column Seal

With a comprehensive array of OEM 2005 Cadillac SRX Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac SRX Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac SRX Steering Column Seal Parts and Q&A

Q: How to replace the Steering Column Seal on the intermediate shaft on 2005 Cadillac SRX?
A: Service teams need to follow the sir caution in service precautions before performing intermediate Steering Shaft seal replacement. The upper intermediate shaft remains attached as the Steering Column gets extracted. Next remove the Steering Column then extract the intermediate shaft seal from the mod plate. Install the new intermediate shaft seal onto the mod plate so it forms an adequate seal between the intermediate shaft seal and the mod plate. Reinstall the Steering Column and refer to the sir disabling and enabling zone 3 in air bags and seat belts for system activation instructions.