How to replace a water pump on 2005 Buick Terraza?

To install the new Water Pump first empty the cooling system then loosen the Water Pump Pulley bolts and take off the Drive Belt. First remove both types of Water Pump Pulley bolts to loosen the attached devices. Then detach the Water Pump bolts, gasket, and element. Ensure the pump faces are clean prior to setting the Water Pump gasket and pump. Fasten the Water Pump bolts and secure them at 10 nm torque. Install the Water Pump Pulley and bolt it lightly before putting on the Drive Belt. Afterwards, bolt the Water Pump Pulley with 25 nm (18 ft. Lbs.) torque. End by filling the cooling system and checking for fluid leaks.

OEM 2005 Buick Terraza Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

View related parts
2005 Buick Terraza Water Pump Part Number: 89017269
$131.73 MSRP: $257.90
You Save: $126.17 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Item Weight: 3.70 Pounds
- Item Dimensions: 6.8 x 6.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89017269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS

2005 Buick Terraza Water Pump

With a comprehensive array of OEM 2005 Buick Terraza Water Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Terraza Water Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Terraza Water Pump Parts and Q&A

Q: How to replace a water pump on 2005 Buick Terraza?
A: To install the new Water Pump first empty the cooling system then loosen the Water Pump Pulley bolts and take off the Drive Belt. First remove both types of Water Pump Pulley bolts to loosen the attached devices. Then detach the Water Pump bolts, gasket, and element. Ensure the pump faces are clean prior to setting the Water Pump gasket and pump. Fasten the Water Pump bolts and secure them at 10 nm torque. Install the Water Pump Pulley and bolt it lightly before putting on the Drive Belt. Afterwards, bolt the Water Pump Pulley with 25 nm (18 ft. Lbs.) torque. End by filling the cooling system and checking for fluid leaks.