How to replace the Rear Crossmember on 2005 Buick Terraza?

To replace the crossmember, raise the vehicle and take off the rear tires. Support the rear differential carrier and remove the mounting bolts. Disconnect the wheel speed sensor harness and the park brake cable rivets. Support the rear crossmember and remove its mounting bolts and lower it. Reinstall components in reverse order, making sure to align and adjust them correctly.

OEM 2005 Buick Terraza Rear Crossmember

Rear Suspension Crossmember

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rear Crossmember found

View related parts
2005 Buick Terraza Suspension Crossmember, Rear Part Number: 15127512
Product Specifications
- Other Name: Crossmember-Rear; Subframe; Crossmember; Crossmember, Rear Frame Cross
- Position: Rear
- Item Weight: 61.90 Pounds
- Item Dimensions: 51.0 x 19.8 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15127512
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Buick Terraza Rear Crossmember

With a comprehensive array of OEM 2005 Buick Terraza Rear Crossmember, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Terraza Rear Crossmember are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Terraza Rear Crossmember Parts and Q&A

Q: How to replace the Rear Crossmember on 2005 Buick Terraza?
A: To replace the crossmember, raise the vehicle and take off the rear tires. Support the rear differential carrier and remove the mounting bolts. Disconnect the wheel speed sensor harness and the park brake cable rivets. Support the rear crossmember and remove its mounting bolts and lower it. Reinstall components in reverse order, making sure to align and adjust them correctly.