How to replace the Trunk Lock Cylinder in the rear compartment lid on 2005 Buick LeSabre?

The lock cylinder in the rear compartment lid may be removed by pulling off the tail lamp assembly and the lock cable. Unscrew the screws holding the lock cylinder, and then pull them off. Installation by placing the cylinder of the lock, fitting it with fasteners and reattaching the latch cable and replacing the lamp assembly.

OEM 2005 Buick LeSabre Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trunk Lock Cylinder found

View related parts
2005 Buick LeSabre Lock Cylinder, Rear Part Number: 12458179
$47.91 MSRP: $57.96
You Save: $10.05 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Rear Compartment; Trunk Lock Cylinder; Door Lock Cylinder
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.5 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12458179
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Trunk Lock Cylinder

With a comprehensive array of OEM 2005 Buick LeSabre Trunk Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Trunk Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Trunk Lock Cylinder Parts and Q&A

Q: How to replace the Trunk Lock Cylinder in the rear compartment lid on 2005 Buick LeSabre?
A: The lock cylinder in the rear compartment lid may be removed by pulling off the tail lamp assembly and the lock cable. Unscrew the screws holding the lock cylinder, and then pull them off. Installation by placing the cylinder of the lock, fitting it with fasteners and reattaching the latch cable and replacing the lamp assembly.