How to Perform an Engine Mount Replacement on the Right Side on 2005 Buick LeSabre?

The vehicle needs adequate elevation and support before one can begin the replacement of the right Engine Mount through usage of a suitable engine support jack. Change the right Engine Mount from the right Engine Mount Bracket by removing its securing nut while adjusting the jack height to lower the engine. First remove the bolt and the two nuts which fasten the mount to the body frame rail. Then extract the right Engine Mount from this position. Place the right Engine Mount against the body frame rail before installing its attaching bolt and nut. Secure the right Engine Mount to the body frame rail by using the two nuts (1, 2) and tighten them to 70 nm (52 ft. Lbs.). Position the engine and install the right Engine Mount Bracket nut to its bracket using a torque of 80 nm (59 ft. Lbs.). Use the engine support jack to finish the installation. Afterward lower the vehicle.

OEM 2005 Buick LeSabre Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Mounts found

View related parts
2005 Buick LeSabre Transmission Mount Part Number: 25736430
$87.67 MSRP: $137.33
You Save: $49.66 (37%)
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Front Bracket; Mount
- Position: Front
- Replaces: 25706431
- Item Weight: 7.10 Pounds
- Item Dimensions: 10.4 x 7.6 x 7.4 inches
- Condition: New
- SKU: 25736430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2005 Buick LeSabre Motor Mount, Passenger Side Part Number: 25710672
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 25638464, 25681326, 25715770, 25695085, 25695931, 25691731, 25713699
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.3 x 7.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2005 Buick LeSabre Support Part Number: 25740662
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Bracket
- Replaces: 25647356
- Item Weight: 6.20 Pounds
- Item Dimensions: 12.5 x 9.2 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25740662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Engine Mount

With a comprehensive array of OEM 2005 Buick LeSabre Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Engine Mount Parts and Q&A

Q: How to Perform an Engine Mount Replacement on the Right Side on 2005 Buick LeSabre?
A: The vehicle needs adequate elevation and support before one can begin the replacement of the right Engine Mount through usage of a suitable engine support jack. Change the right Engine Mount from the right Engine Mount Bracket by removing its securing nut while adjusting the jack height to lower the engine. First remove the bolt and the two nuts which fasten the mount to the body frame rail. Then extract the right Engine Mount from this position. Place the right Engine Mount against the body frame rail before installing its attaching bolt and nut. Secure the right Engine Mount to the body frame rail by using the two nuts (1, 2) and tighten them to 70 nm (52 ft. Lbs.). Position the engine and install the right Engine Mount Bracket nut to its bracket using a torque of 80 nm (59 ft. Lbs.). Use the engine support jack to finish the installation. Afterward lower the vehicle.