How to replace the cruise control module on 2004 Chevrolet Venture?

To change the cruise control module one will need to remove the cruise control cable from the module then one will disconnect the electrical connector. Second, unfasten the mounting bracket bolt from the cruise control module and then pull the module out of the mounting bracket. For the installation, put the cruise control module back on the mounting and make sure that you take into account the Fastener Notice in Service Precautions. Mount the module by installing the mounting bracket bolt and tighten it torqued to 6 N.m (53 lb in). After that, reconnect the electrical connector onto the module and next install the cruise control cable and adjust the cruise control cable as required.

OEM 2004 Chevrolet Venture Cruise Control Module

Cruise Control Module Speed Control

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Module found

View related parts
2004 Chevrolet Venture Control Module Part Number: 12575410
Product Specifications
- Other Name: Module Assembly-Cruise Control; Cruise Control Module; Module; Module, Cruise Control
- Replaces: 12572634
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.1 x 6.1 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12575410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2004 Chevrolet Venture Cruise Control Module

With a comprehensive array of OEM 2004 Chevrolet Venture Cruise Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Venture Cruise Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Venture Cruise Control Module Parts and Q&A

Q: How to replace the cruise control module on 2004 Chevrolet Venture?
A: To change the cruise control module one will need to remove the cruise control cable from the module then one will disconnect the electrical connector. Second, unfasten the mounting bracket bolt from the cruise control module and then pull the module out of the mounting bracket. For the installation, put the cruise control module back on the mounting and make sure that you take into account the Fastener Notice in Service Precautions. Mount the module by installing the mounting bracket bolt and tighten it torqued to 6 N.m (53 lb in). After that, reconnect the electrical connector onto the module and next install the cruise control cable and adjust the cruise control cable as required.