How to replace the rear Drive Shaft on 2004 Chevrolet Trailblazer?

Begin by lifting the vehicle properly and then create precise markings for all driveline components that position them against the propeller shaft and axles and pinion and output shafts and flanges so the installation will maintain the initial components' relationship. When removing the bolts from the pinion yoke rear axle retainer avoid hammering the yoke's ears and refraining from using tools between universal joints for the sake of avoiding injection joint fractures. First disconnect the prop shaft from its position at the rear axle pinion yoke through a forward sliding motion before removing it from transmission or Transfer Case position by pulling it rearward thus completing the prop shaft removal process. The Slip Yoke splines need inspection for proper grease application before installation while lubrication should be provided if necessary. Position the propeller shaft into the transmission or Transfer Case according to reference marks removed previously before fitting it to the rear axle pinion yoke by using the same reference points. Drive the vehicle down then install the yoke retainers and bolts while tightening them to 20 nm (15 ft. Lbs.).

OEM 2004 Chevrolet Trailblazer Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Shafts found

View related parts
2004 Chevrolet Trailblazer Drive Shaft Part Number: 15833884
$459.54 MSRP: $726.31
You Save: $266.77 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 16.20 Pounds
- Item Dimensions: 60.3 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15833884
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
2004 Chevrolet Trailblazer Drive Shaft Part Number: 15861601
$374.87 MSRP: $746.30
You Save: $371.43 (50%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15163667
- Item Weight: 24.00 Pounds
- Item Dimensions: 4.2 x 4.1 x 23.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15861601
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
2004 Chevrolet Trailblazer Drive Shaft Part Number: 15036982
Product Specifications
- Other Name: Shaft, Propeller; Driveshaft
- Replaces: 15152332, 15188012
- Item Weight: 15.50 Pounds
- Item Dimensions: 51.0 x 3.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15036982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
2004 Chevrolet Trailblazer Axle Assembly, Rear Part Number: 15134677
Product Specifications
- Other Name: Axle, Rear Axle; Axle Shaft
- Position: Rear
- Replaces: 15065723, 15107453, 15171759
- Condition: New
- SKU: 15134677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Trailblazer Submodels:
- LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
2004 Chevrolet Trailblazer Drive Shaft Part Number: 15833881
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15152336
- Item Weight: 14.20 Pounds
- Item Dimensions: 61.0 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15833881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
2004 Chevrolet Trailblazer Drive Shaft Part Number: 15833880
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15113111
- Item Weight: 18.70 Pounds
- Item Dimensions: 75.9 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15833880
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- LS, LT, North Face | 6 Cyl 4.2 L GAS

2004 Chevrolet Trailblazer Drive Shaft

With a comprehensive array of OEM 2004 Chevrolet Trailblazer Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Trailblazer Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Trailblazer Drive Shaft Parts and Q&A

Q: How to replace the rear Drive Shaft on 2004 Chevrolet Trailblazer?
A: Begin by lifting the vehicle properly and then create precise markings for all driveline components that position them against the propeller shaft and axles and pinion and output shafts and flanges so the installation will maintain the initial components' relationship. When removing the bolts from the pinion yoke rear axle retainer avoid hammering the yoke's ears and refraining from using tools between universal joints for the sake of avoiding injection joint fractures. First disconnect the prop shaft from its position at the rear axle pinion yoke through a forward sliding motion before removing it from transmission or Transfer Case position by pulling it rearward thus completing the prop shaft removal process. The Slip Yoke splines need inspection for proper grease application before installation while lubrication should be provided if necessary. Position the propeller shaft into the transmission or Transfer Case according to reference marks removed previously before fitting it to the rear axle pinion yoke by using the same reference points. Drive the vehicle down then install the yoke retainers and bolts while tightening them to 20 nm (15 ft. Lbs.).