How to replace a two-piece drive shaft on 2004 Chevrolet S10?

To replace a two-piece propeller shaft, raise the vehicle and mark all driveline components prior to disassembly. Remove the centre bearing support bracket and detach the rear propeller shaft. Clean and check all parts for wear. Lubricate the splines, install the front and back propeller shaft and tighten all bolts firmly.

OEM 2004 Chevrolet S10 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Drive Shafts found

View related parts
2004 Chevrolet S10 Drive Shaft Part Number: 15036984
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Weight: 14.60 Pounds
- Item Dimensions: 39.6 x 4.0 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15036984
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2004 Chevrolet S10 Drive Shaft Part Number: 15083841
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15708722
- Item Weight: 16.20 Pounds
- Item Dimensions: 64.0 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15083841
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2004 Chevrolet S10 Drive Shaft

With a comprehensive array of OEM 2004 Chevrolet S10 Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet S10 Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet S10 Drive Shaft Parts and Q&A

Q: How to replace a two-piece drive shaft on 2004 Chevrolet S10?
A: To replace a two-piece propeller shaft, raise the vehicle and mark all driveline components prior to disassembly. Remove the centre bearing support bracket and detach the rear propeller shaft. Clean and check all parts for wear. Lubricate the splines, install the front and back propeller shaft and tighten all bolts firmly.