How to replace the front coil springs on 2004 Chevrolet S10?

In order to change the front coil springs, take out the stabilizer shaft connection and the shock absorber. Install a Coil spring Remover and Installer to take the tension off, remove the bolts and remove the spring. To install, fit the spring and insulators, fix the control arm and give appropriate alignment and reconnect the parts.

OEM 2004 Chevrolet S10 Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coil Springs found

View related parts
2004 Chevrolet S10 Coil Spring, Front Part Number: 15058957
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs; Spring; Spring, Front(Coil Type)
- Position: Front
- Replaces: 15654770
- Item Weight: 9.90 Pounds
- Item Dimensions: 13.9 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15058957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet S10 Submodels:
- Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

2004 Chevrolet S10 Coil Springs

With a comprehensive array of OEM 2004 Chevrolet S10 Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet S10 Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet S10 Coil Springs Parts and Q&A

Q: How to replace the front coil springs on 2004 Chevrolet S10?
A: In order to change the front coil springs, take out the stabilizer shaft connection and the shock absorber. Install a Coil spring Remover and Installer to take the tension off, remove the bolts and remove the spring. To install, fit the spring and insulators, fix the control arm and give appropriate alignment and reconnect the parts.