How to replace the headlight assembly or headlight bulb or cornering, sidemarker, park, and turn signal bulb on 2004 Chevrolet Malibu?

Question

Accepted Answer

While holding the headlamp to protect it open the hood before replacing any headlamp parts. Use a tool to take out all bolts from the headlamp assembly then push upward to free the attaching tabs on its bottom and fender edge. Unplug the power connector from the headlamp before you detach the unit from its vehicle mount. Turn the headlamp bulb access cover to the left if necessary. When ready, you can remove the socket by turning it counterclockwise. Unplug the headlamp bulb electrical wire when needed. To take out the park/turn bulb from the socket turn it counterclockwise and then turn the access cover counterclockwise. Remove the bulb when necessary by gently pulling it from its socket. To install the park/turn bulb you need to place it into the bulb socket and turn the socket clock-wise to position it inside the headlamp housing. Secure the park/turn bulb access cover after turning it clockwise by placing the electrical connector on the headlight bulb and locking the housing socket through clockwise rotation. Twist the headlamp bulb access cover clockwise as you reposition the electrical connector into the assembly and place it back on the vehicle. You should attach headlamp assembly bolts then fasten them to 2 n.m torque (18 lb inch settings). Verify the headlamp alignment after closing the hood while making essential changes to the optical system.

OEM 2004 Chevrolet Malibu Headlight Bulb

2 Headlight Bulbs found

2004 Chevrolet Malibu Headlamp Bulb, Green Line Part Number: 13586977

2004 Chevrolet Malibu Headlamp Bulb Part Number: 10351666

2004 Chevrolet Malibu Headlight Bulb

2004 Chevrolet Malibu Headlight Bulb Parts and Q&A

Related 2004 Chevrolet Malibu Parts

Alternate Year Models