How to replace the multifunction turn signal switch on 2004 Chevrolet Classic?

To detach the multifunction turn signal switch, turn off SIR system, remove the mounting screw and do away with the switch. Unscrew the electric connections, reconnect them, and insert the switch on the column and press the horn pin. Install and screw the mounting screw and enable the SIR system and test it.

OEM 2004 Chevrolet Classic Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2004 Chevrolet Classic Multifunction Switch Part Number: 19244094
$21.57 MSRP: $32.11
You Save: $10.54 (33%)
Product Specifications
- Other Name: Switch Assembly, Turn Signal, Headlamp, Wiper & Washer; Multi Purpose Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Wiper Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 22661036, 22602262, 22676853
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.4 x 7.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2004 Chevrolet Classic Turn Signal Switch

With a comprehensive array of OEM 2004 Chevrolet Classic Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Classic Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Classic Turn Signal Switch Parts and Q&A

Q: How to replace the multifunction turn signal switch on 2004 Chevrolet Classic?
A: To detach the multifunction turn signal switch, turn off SIR system, remove the mounting screw and do away with the switch. Unscrew the electric connections, reconnect them, and insert the switch on the column and press the horn pin. Install and screw the mounting screw and enable the SIR system and test it.