How to replace the shock absorber on 2004 Chevrolet Classic?

The first step for strut assembly replacement requires vehicle support under elevation and subsequent tire and wheel removal. First use a marker to trace the strut onto the knuckle before removing the strut mount to body nut in the trunk region. You should start by eliminating the fender well strut bolts before you remove the strut knuckle bolts and nuts from the strut . Pull the strut assembly out of the vehicle after completing all steps. Start by placing the strut back into the vehicle before you slightly tighten the knuckle bolts and nuts . First, plumb the scribe marks for alignment then secure the body bolts inside the fender well at 25 nm (18 ft. Lbs.) before torquing the knuckle nut bolts to 120 nm (89 ft. Lbs.). Reinstall the tire and wheel assembly while lowering the vehicle and install the trunk-area strut to body nut before final tightening to 25 nm (18 ft. Lbs.). Finish the process by verifying wheel alignment.

OEM 2004 Chevrolet Classic Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shock Absorbers found

View related parts
2004 Chevrolet Classic Strut, Front Part Number: 22064770
$185.31 MSRP: $332.40
You Save: $147.09 (45%)
Product Specifications
- Other Name: Strut, Front Suspension; Suspension Strut Assembly Kit; Complete Strut Kit; Complete Strut; Shock Absorber; Strut, Front And Rear Suspension
- Position: Front
- Item Weight: 6.10 Pounds
- Item Dimensions: 8.3 x 8.2 x 19.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22064770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS
View related parts
2004 Chevrolet Classic Strut Assembly Part Number: 19179863
Product Specifications
- Other Name: Strut, Front And Rear Suspension; Shock Absorber; Strut
- Position: Rear
- Replaces: 89047818, 22064771
- Item Weight: 9.30 Pounds
- Item Dimensions: 25.7 x 8.2 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19179863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Classic Submodels:
- Base, LS | 4 Cyl 2.2 L GAS

2004 Chevrolet Classic Shock Absorber

With a comprehensive array of OEM 2004 Chevrolet Classic Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Classic Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Classic Shock Absorber Parts and Q&A

Q: How to replace the shock absorber on 2004 Chevrolet Classic?
A: The first step for strut assembly replacement requires vehicle support under elevation and subsequent tire and wheel removal. First use a marker to trace the strut onto the knuckle before removing the strut mount to body nut in the trunk region. You should start by eliminating the fender well strut bolts before you remove the strut knuckle bolts and nuts from the strut . Pull the strut assembly out of the vehicle after completing all steps. Start by placing the strut back into the vehicle before you slightly tighten the knuckle bolts and nuts . First, plumb the scribe marks for alignment then secure the body bolts inside the fender well at 25 nm (18 ft. Lbs.) before torquing the knuckle nut bolts to 120 nm (89 ft. Lbs.). Reinstall the tire and wheel assembly while lowering the vehicle and install the trunk-area strut to body nut before final tightening to 25 nm (18 ft. Lbs.). Finish the process by verifying wheel alignment.