What tools are required to service and repair the Steering Angle Sensor, and what are the steps involved in the process on 2004 Cadillac SRX?

In order to service the Steering Wheel Position Sensor, first of all, disable the SIR system and take out the steering column. Removing Pivot Pins Use a Pivot Pin Remover to remove the boot seal by removing the pivot pins. Install the sensor assembly (where applicable) by ensuring that it is positioned correctly and reassemble the steering column and activate the SIR system.

OEM 2004 Cadillac SRX Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2004 Cadillac SRX Position Sensor Part Number: 15231652
$106.08 MSRP: $166.15
You Save: $60.07 (37%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor
- Replaces: 26059045, 88965330
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 3.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15231652
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2004 Cadillac SRX Steering Angle Sensor

With a comprehensive array of OEM 2004 Cadillac SRX Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac SRX Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac SRX Steering Angle Sensor Parts and Q&A

Q: What tools are required to service and repair the Steering Angle Sensor, and what are the steps involved in the process on 2004 Cadillac SRX?
A: In order to service the Steering Wheel Position Sensor, first of all, disable the SIR system and take out the steering column. Removing Pivot Pins Use a Pivot Pin Remover to remove the boot seal by removing the pivot pins. Install the sensor assembly (where applicable) by ensuring that it is positioned correctly and reassemble the steering column and activate the SIR system.