How to replace the brake fluid level sensor on 2004 Buick Rendezvous?

Changing the Master Cylinder Fluid Level Sensor requires simple disconnection of the electrical connector and removal of the sensor with the needle nose pliers in order to press the locking tabs down. Installation requires the sensor to be installed by inserting it until the tabs are fitted, and then the electrical connector should be reconnected.

OEM 2004 Buick Rendezvous Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2004 Buick Rendezvous Level Sensor Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2004 Buick Rendezvous Brake Fluid Level Sensor

With a comprehensive array of OEM 2004 Buick Rendezvous Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Rendezvous Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Rendezvous Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2004 Buick Rendezvous?
A: Changing the Master Cylinder Fluid Level Sensor requires simple disconnection of the electrical connector and removal of the sensor with the needle nose pliers in order to press the locking tabs down. Installation requires the sensor to be installed by inserting it until the tabs are fitted, and then the electrical connector should be reconnected.