ChevyParts
My Garage
My Account
Cart
OEM 2004 Buick LeSabre Automatic Transmission Filter
AT Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Automatic Transmission Filter found
2004 Buick LeSabre Filter Element Part Number: 24227477
$40.80 MSRP: $72.86You Save: $32.06 (44%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Filter Kit, Automatic Transmission Fluid; Transmission Filter; Hydraulic Filter; Auto Transmission Filter; Filter Kit, Oil Suction Tube; Oil Pan Pump Suction.
- Replaces: 24206433
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.6 x 7.7 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24227477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick LeSabre Automatic Transmission Filter
With a comprehensive array of OEM 2004 Buick LeSabre Automatic Transmission Filter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick LeSabre Automatic Transmission Filter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Buick LeSabre Automatic Transmission Filter Parts and Q&A
- Q: How to Change the Automatic Transmission Filter and Inspect Fluid Levels on 2004 Buick LeSabre?A: A proper start to automatic transmission fluid and filter replacement requires vehicle lift with support followed by placing a drain pan underneath the transaxle Oil Pan. Begin by taking out the Oil Pan bolts from the front and sides while leaving the rear bolts tightened by four turns. The rubber mallet should be used to tap the Oil Pan followed by either a prying action or light tapping until fluid drains completely. The transmission fluid color should be inspected. The following step requires the removal of remaining Oil Pan bolts together with the Oil Pan and its gasket. Youtee a long screwdriver to open the oil filter neck out from its seal and examine the oxidation and wear of the oil filter seal. The slide hammer tool (J 6125-1B) and universal seal remover (J 23129) should be used to remove the seal if required. A new seal needs transmission assembly lubricant (J 36850) or petroleum jelly to be coated lightly before installation. Reinstall the filter into the case while reusing the Oil Pan gaskets except when the sealing surface shows signs of damage. Mount the Oil Pan together with its gasket at the same time but maintain proper torque on the Oil Pan bolts to 14 nm (125 inch lbs.). The last step includes vehicle descent followed by proper transaxle fluid level filling before checking for transmission fluid and Oil Pan Gasket leaks.
